:!

Oh god :lol:

nah it isnt too bad worst part was working up the courage to start chopping shit to bits in the car :)

Christ, sounds like a misson

only video inputs u will need an fm modulator or if u have a new headunit like i do u can buy a cable to plumb the ps2 or dvd player or whatevers sound output into the cd changer input.

originally i bought a plastic under-dash single din mounting adaptor thing but it was totally the wrong shape so i chopped the front off it chopped out the vents etc sanded it down till it squeezed in the gap perfectly then glued it in with araldite from behind etc and stuck it in there. but i needed to cut a fair bit of shit back behind there to fit it in.

quote:

---

Originally posted by flipmo
the one in your pic is the exact same one i have.

there is also a similar one going a lot on ebay for a little over £200

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3030793792&category=14946

[Edited on 22-06-2003 by flipmo]

---

Ah ha wicked !

Whats it like then mate ?? is it electric or manual ?

the one in your pic is the exact same one i have.

there is also a similar one going a lot on ebay for a little over £200


but watch when buying shit like this from ebay cos u get lumbered with meybe £25 -£30 shipping and then duty taxes when it arrives at your door as a lot of it is shipped from china which would be another £30-£40 which wont be mentioned
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3030793792&category=14946


[Edited on 22-06-2003 by flipmo]

£100 ?? the one i looked at (above) was £200. Not sure if it is motorised though, ive actually asked the guy so im awaiting a reply.

about £200

got it off ebay for a tad over £100, its not motorised or anything but has decent quality screen and 2 video inputs is handy.

what sortof prices are they?

:D

not at the moment not mate but ill take some tomorrow if ican.


[Edited on 22-06-2003 by flipmo]

any pics mate of what u done / have done now ??

i have one of these, stuck it where the center vents/hazard switch used to be as it caught on the gearstick and just generally didnt fit very well where the ashtray used to be even when i made my own mounting for it.

on another note regarding where ive stuck it. the hazard switch had my vauxhall alarms l.e.d buit into it anyone know what pins on the hazard plug corespond to the l.e.d? so i can tap in a new un that worked the same as the vaux one. also for it to act like that would i need to buy a flashing or constant one?

cheers :)


oh and it comes with one cable that splits into g,12v and 2 video inputs so u can use it with a dvd,ps2,digi cam etc

[Edited on 22-06-2003 by flipmo]

Ah Ha, Kooool !

i see them in my local wilco, its just a bit of metal, that u would have 2 screw to the plastic where the ash tray used 2 b, then, u just slot it in like a normal radio

never heard about that before ?!?!

autoleads do a bracket that would wit under the radio area where the ash tray is.

Obviously (i guess) you have to buy the dvd player or add a playstation 2 to it ??
Also where would u put this as u cant replace the radio in car with it cos u need both!!

Ive seen some peeps put them in the air vent section of car ??