3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
on a 97> corsa B
what mileage did it snap at? i.e: how many miles did belt do before it broke?
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
about 8k on mine would u believe...
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
you have to think of the water pump as well.. i just did a timing belt and water pump on the misuss tigra on saturday x14xe.... lucky i did cos the baring in the water pump was completely shaged/nonexsistant.... i dunno how the belt hasent snaped before now...
the car has 47k on the clock....
[Edited on 18-04-2005 by Siberia]
|
sassyminx
Member
Registered: 10th Jan 04
Location: Hartlepool Drives: Cossie
User status: Offline
|
mine had done 33k on a replaced belt
snapped and bent 8 valves, pre tensioners and piston linings
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
better get mine done i guess, just coming up to 30,000 on replacement belt
what year was yours tho sassy, as vauxhall changed the intervals on corsa at 1997
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
40k intervals isnt it or there abouts??
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
designed to do 80k, vauxhall say 40k to be safe and Corsasport says 30k
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
only takes an hour or so on your engine anyways... easy peasy...
|
Ojc
Member
Registered: 14th Nov 00
Location: Reading: Drives : Clio 197
User status: Offline
|
Rachels car was ticking real bad, she took it down Vauxhall and on warrenty they replaced the cambelt and water pump, that was on about 37k
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
did they have to strum her bean too?
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
I've never seen a belt snap on it's own.
It always seems to be the rollers, if you have shinne SBD metal items, then you could run to 50k on the rubber band, provided you check it's condition every service.
|
sassyminx
Member
Registered: 10th Jan 04
Location: Hartlepool Drives: Cossie
User status: Offline
|
quote: Originally posted by 3CorsaMeal
better get mine done i guess, just coming up to 30,000 on replacement belt
what year was yours tho sassy, as vauxhall changed the intervals on corsa at 1997
1995
it was on 87k when it snapped
|
Pop
Member
Registered: 8th May 03
Location: Reading
User status: Offline
|
I got a new belt at 56k (3rd belt) ... 12k later it snapped when the water pump collapsed.
... 1.4 16v ... all 16v had to be replaced, water pump, pistons, head rebuild, head skimmed, air con recharged and sealing all valves and springs . that's what happens when the cambelt snaps at 70
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
IMO the waterpump/rollers/tensioner/belt should all be replaced at the same time..... a water pump is only £30-£40
|
leeshez
Member
Registered: 3rd May 01
Location: Great Harwood, Lancashire
User status: Offline
|
I have been lucky
|
1.4__SRi
Banned
Registered: 14th Apr 05
User status: Offline
|
quote: Originally posted by sassyminx
mine had done 33k on a replaced belt
snapped and bent 8 valves, pre tensioners and piston linings
how the fuck do you bend piston linings
|
sassyminx
Member
Registered: 10th Jan 04
Location: Hartlepool Drives: Cossie
User status: Offline
|
quote: Originally posted by 1.4__SRi
quote: Originally posted by sassyminx
mine had done 33k on a replaced belt
snapped and bent 8 valves, pre tensioners and piston linings
how the fuck do you bend piston linings
didnt say BENT PISTON LININGS
says bent 8 valves
fried piston linings better for ya
|
--DAN--
Member
Registered: 3rd Feb 03
Location: Bottesford. Drives;3 Series
User status: Offline
|
Changed Cambelt on my 1.4 16v Sport at 40k, then it snapped at 48k, bent all 16 valves, fucked a piston, needed loads of head work. Cost £700 to fix. But it was never the same again, used to use lots of oil etc, ended up putting new 1.6 16v in it.
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
Pah, bent valves, check this out
Please not the valve wedged halfway in to the chamber.
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
quote: Originally posted by Siberia
IMO the waterpump/rollers/tensioner/belt should all be replaced at the same time..... a water pump is only £30-£40
sib, aren't water pumps closer to £25, £40
|
LukeGSi
Member
Registered: 9th Dec 03
User status: Offline
|
Where is the cheapest place to get a water pump, belt and rollers etc?
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
Autovaux generally win if you want a GM/elring/fedral mogual set
Or get trade club at yor local dealership.
|
LukeGSi
Member
Registered: 9th Dec 03
User status: Offline
|
Cheers....DIY job or best left to the garage?
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
quote: Originally posted by j1400
quote: Originally posted by Siberia
IMO the waterpump/rollers/tensioner/belt should all be replaced at the same time..... a water pump is only £30-£40
sib, aren't water pumps closer to £25, £40
cost me €54 on sat morning for an x14xe... rough conversion about £34-£35 u'd prolly get them cheaper over there but i didnt have time to wait for it to ship
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
DIY, not difficult, just take your time!
|