jrsteeve
Member
Registered: 3rd Apr 02
Location: Manchester
User status: Offline
|
Just changed my Sony headunit for a Clarion tv headunit, but the wiring is a little different. The 2 problems are:
1. The usual loss of memory, do i just swap the main power and accessory power cables round like with the Sony, or is it different.
2. There is no obvious remote cable (to turn my amp on when the hu is turned on. The options are:
+12v main power
auto antenna
illumination
+12v accessory
ground
Any ideas 
cheers
|
Dom
Member
Registered: 13th Sep 03
User status: Offline
|
use the auto antenna for the remote lead  should work a treat 
And yea, there is something in the tutorial section about memory lost on HU's, have a butchers mate
|
jrsteeve
Member
Registered: 3rd Apr 02
Location: Manchester
User status: Offline
|
will do, i know its that way for most units just wanted to double check as it aint a cheap hu.
cheers
|
Dom
Member
Registered: 13th Sep 03
User status: Offline
|
well i can only assume that you just have to swap the power and accesory feeds around, although at worst it should only a blow a fuse (dont hold me to that though lol).
|
jrsteeve
Member
Registered: 3rd Apr 02
Location: Manchester
User status: Offline
|
cheers fella, i'm sure it'd be ok, but there are just so many bloody wires with these tvs.
|
