Edd
Member
Registered: 8th Nov 04
Location: Glasgow
User status: Offline
|
how the fook do you get them off?tried what it said in tutorials and it didnt work!
|
Jess GSi
Member
Registered: 2nd Feb 05
Location: Hepworth, Suffolk
User status: Offline
|
you have to take a little pin out first. i jus stuck a screwdriver behind to get the pin out. but cant get it bk in!!
|
5chaap2k
Member
Registered: 20th Apr 05
Location: Schiedam, Netherlands
User status: Offline
|
there's a U shaped clip on it (hard to see but it's there
try rubbing it out with an old blanket or tshirt, worked fine for me
|
Jess GSi
Member
Registered: 2nd Feb 05
Location: Hepworth, Suffolk
User status: Offline
|
found this on some1 elses post.
winder is held on with a circlip i recomend going to halfors or motor facto and getting a circlip tool failing that try and flick it off with a knife if you have removed the door handels and everything else the door card just pulls off ^ upwaards
|
Edd
Member
Registered: 8th Nov 04
Location: Glasgow
User status: Offline
|
right i'll give that a go tonight,its a pain in the arse!
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
u dont need a tool!
put a duster or some old fabric behind it and do a sawing action. the clip will owrk its way off
|
White_1.2
Member
Registered: 9th Feb 05
Location: Grimsby
User status: Offline
|
i found a jewelers screwdriver handy to get the damn things off
|
Edd
Member
Registered: 8th Nov 04
Location: Glasgow
User status: Offline
|
thanks for the help everyone i'll have a go tonight hopefully it works
|
eskiboy
Member
Registered: 12th Nov 04
User status: Offline
|
push the door card in slightly and u can see the clip. then use a small flat blade to flick clip. when replaceing put clip into winder then give it a swift tap and it all pops back into place.
|