loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
hey
wat distibution box is which?? guessing left is power fused, middle power distribution, and the right is fused but not really sure y
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
How many amps you running?
The one on the left is the battery one, goes as close as you can to the battery and is fused yes!
The one on the right is a fuseddistribution block, will split the batery cable fom the one cable to two cables which run of to the two different amp!
The round one looks like a non fused distribution block just splits the power down to run to your different amps!
Woudlnt need both, if your running 2 amps use the one on the right, more then use the midlle one!
Keep the cable from the distibution block to the amps as short as possible!
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
yeah 2 amps, kool.
i was going to use the one on the right, but got confused by the left one.
other question, wat should i use as an earth i got a metre on 0awg for the earth
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
ideally it should be the same gauge as the powercable running down your car
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
i meant as in where should i earth it, sorry should of made it a bit more clear
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
oh, i use the seat belt bolt. Lift up the rear seats(looks like u lifted up everything) and look for the bolt that holds down the seat belt clip - or watever its called
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
lol, no need to lift seats out, lol, car is empty apart from a drivers seat atm.
laying wire is such a bitch
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
or you could just sand some paint away on the shell, drill a pilot hole and screw down the earth that way
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
quote:
Originally posted by jakethesnake
or you could just sand some paint away on the shell, drill a pilot hole and screw down the earth that way
I did this but its no great
Im using a bolt from the 60/40 split bracket
earth cable can be the same size as the cable running from the distribution block, im guessing 4 gauge!
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
I rubbed the paint away where every i earthed it!
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
cheer, thanks for the help
|
