CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
Hope some one can help !
on my brake servo pipe i have a thin vacuum line coming off where do i put this or do i block it off
also i have a red plug with 2 vacuum lines on it where do the vacumms lines come from and go to
this is for the 2.0xe redtop
Thanks in advance for any help 
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
the red plug thing with the two pipes is the fuel tank vent valve... one needs to go to the brake servo pipe, the other to the charcoal canister under the drivers wing
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
ok so this red plug is there a certain way which the vacuum pipes need to go or can i plug the brake servo onto either of the 2 connections on the red plug
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
quote:
Originally posted by CoastalCorsa
ok so this red plug is there a certain way which the vacuum pipes need to go or can i plug the brake servo onto either of the 2 connections on the red plug
either way'll do mate
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
also i have another vacuum pipe which is just below ma water bottle not sure where it is from as it comes from round back of engine some where
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
quote:
Originally posted by CoastalCorsa
also i have another vacuum pipe which is just below ma water bottle not sure where it is from as it comes from round back of engine some where
that'll be the charcoal cannister pipe, connect that to the other stub on the red plug thingy
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
one problem here tho as i currently have a vacuum pipe from inlet area what happens with this
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
wherabouts on the inlet... does the fpr have a vac hose on the top ?
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
i have located the char cannister and brake servo and red plug
where my fuel pressure regulater vacuum goes on to inlet there is another vacuum pipe there where does that one go to
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
fpr yes then goes onto inlet pretty central are next to that there is another vacuum pipe
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
quote:
Originally posted by CoastalCorsa
fpr yes then goes onto inlet pretty central are next to that there is another vacuum pipe
i blanked mine off, it wasn't required
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
few thank god
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
I wanna know where the charcoal canister is..
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
quote:
Originally posted by Rob B
I wanna know where the charcoal canister is..
behind the drivers wing
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
i have had a look at the set up of the sensor an red plug thing and on the x14/6xe it connects to charcoal can and the nipple on the inlet not the brake servo
am a little confused now cos i have a spare vacuum coming from inlet housing
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
also on the x14/6xe there is a white an yellow valve type thing should my 2.0xe have one of these on the brake servo vacuum aswell
|
