corsa_griff
Member
Registered: 1st May 05
Location: Cheslyn Hay, Staffordshire
User status: Offline
|
is there a kit that i can buy for this, and is it easy to fit
[Edited on 06-03-2006 by corsa_griff]
|
Planty02
Member
Registered: 5th Mar 05
Location: Burslem, Stoke-on-Trent
User status: Offline
|
might be better of going to a scrappy and getting the motors, switches, etc from another corsa rather than buying a kit. Genuine GM parts will be better IMO
|
Planty02
Member
Registered: 5th Mar 05
Location: Burslem, Stoke-on-Trent
User status: Offline
|
theres a tutorial for fitting leccy windows in the tutorials section
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
i did it to mine! i used GM parts from another corsa though,
You will need to check if you have the loom inside the car though, to do this remove the multiplug from the door shut and count how many wires there is, if you have about 14 you have leccy windows loom and if you have 20 then you have leccy windows and leccy mirrors loom, any less than 14 and its going to be a real pain to install leccy windows
if you do have the loom then the conversion is fairly straight forward it took me about 3/4s of a day make sure you have some good pop rivits (the tutorial on here gives the correct size) and give yourself plenty of time to spare.. keep the whole weekend free if you are planning to do it then, just incase something goes wrong.
|
corsa_griff
Member
Registered: 1st May 05
Location: Cheslyn Hay, Staffordshire
User status: Offline
|
thanks for this information people
|
boyracer2002
Member
Registered: 10th Aug 02
Location: West Yorkshire
User status: Offline
|
Piece of piss mate, fitted mine and Dan A's off here, took me bout 2 - 2 1/2 hours to take his doors off, take old stuff out fit new parts, hang doors again etc easy job
|
Ryan_G1
Member
Registered: 29th Aug 05
Location: East Ayrshire
User status: Offline
|
How do you unclip the wiring plug from the door side?
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
twist it cant remember if it is counter clockwise or clockwise, try both it will only go one way!
|
Ryan_G1
Member
Registered: 29th Aug 05
Location: East Ayrshire
User status: Offline
|
Cheers mate
|