luca82
Member
Registered: 6th Mar 06
Location: ITALY (near Rome)
User status: Offline
|
hi!!! 
this is my 1st post my name is luca i live in italy and have a corsa b 1995 1.4 8v 60hp and corsa C 2002 1.012v
now my father use the b type and the c is only mine........
 i want io use my old blaupunkt los angeles mp 52 on my corsa c and connect it completely with original display and original opel steer remote control
does anyone knows some web link that explain how to do it or how to buld/DIY the very expensive blaupunkt originali interface????
thanks in advance and sorry for my not good english
|
luca82
Member
Registered: 6th Mar 06
Location: ITALY (near Rome)
User status: Offline
|
i want to do something like this:
http://www.bluespot.co.uk/install/show_model.asp?id=281
the 1st interface!!
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
hi and welcome to the site
edit... is that the correct blaupunkt model??? as i can not find the info on it only the los angeles mp72 and not the mp52 ??
You can get a lead for just the steering controls only what comes in 2 parts for around 30-35 pounds sterling but if you want the display working aswell you have to buy the blaupunkt lead (try the link below)
the alpines are the same if you want both display and controls you have to buy there leads @ 50-65 pounds sterling
the 2 main aftermarket lead makers are...
http://www.autoleads.co.uk
and
http://www.connects2.com
[Edited on 13-03-2006 by flash22]
[Edited on 13-03-2006 by flash22]
[Edited on 13-03-2006 by flash22]
[Edited on 16-03-2006 by flash22]
|
luca82
Member
Registered: 6th Mar 06
Location: ITALY (near Rome)
User status: Offline
|
thank you!!
i've seen connect2 but autoleads link open an car outlet not an accessory site...
do you know if is any site on the net taht explain how to buld at home hte interface???
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
i have been looking for this information for over a year or so and seems to be kept well guarded secret by the companys that have it. I got a few dead leads given to me i took 2-3 of them apart and thay were filled with resin\glue so you cant even look at them the one lead that i could take to bits had no markings on the components (a mixture of surface mount and normal parts). the technical information on the data lines is hard to come by aswell.
btw the autoleads link was my fault i put .com instead of .co.uk sorry Now fixed !!!!
[Edited on 16-03-2006 by flash22]
[Edited on 16-03-2006 by flash22]
|
luca82
Member
Registered: 6th Mar 06
Location: ITALY (near Rome)
User status: Offline
|
quote:
Originally posted by flash22
i. I got a few dead leads given to me i took 2-3 of them apart and thay were filled with resin\glue so you cant even look at them the one lead that i could take to bits had no markings on the components (a mixture of surface mount and normal parts).
try to put them into some nitro diluent for 24 hours .......the resin will go awayvery very easily..... if you do that send me a photo of the circuit i will try to reproduce it
a my friend could help us!!!!!!!!.........he says to me that must to know the protocol that uses the blaupunkt stereo to display out than he project an interface for us that translate the blaupunkt protocol to opel/vauxall i2c protocol........anyone knows how is called blaupunkt protocol???
|
luca82
Member
Registered: 6th Mar 06
Location: ITALY (near Rome)
User status: Offline
|
so here you can find info about car display and remote steering
http://elektron.pol.lublin.pl/users/djlj24...le/opeldisp.htm
http://elektron.pol.lublin.pl/users/djlj24...le/pilotyca.htm
http://www.carluccio.de/images/tid-protokoll.pdf
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
thank luca time to learn a new lauguage i think but still usefull none the less
|
luca82
Member
Registered: 6th Mar 06
Location: ITALY (near Rome)
User status: Offline
|
can you send me a photo of the interface's circuits that you have??? also with a scanner could be useful........
|
