jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
ive done a search on this topic but still struggling to find the full answer.....
ive got a set of dials from a 1.6 sport which im putting into my gf's '97 1.2i 8v.
ive read about a 'pea green' wire that needs to be connected.......... where is this wire and where does it need to go??????
all help is required asap
cheers
james
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
^^^^^^^^^
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
the wire shud be already there in the loom
plug them in and see what happens
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=270154
|
snottysnowy1
Member
Registered: 15th Mar 04
Location: Durham, County Durham
User status: Offline
|
on a 1.2 8v the wire is not on the plug. It is located going into the ecu in the footwell of the driver on the right. You will need to cut the pea green wire and wire it direct to the plug for the speedo. Thats what i had to do to mine anyway
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
^eh? in the thread i put above... the pictures i put up are from my old 1.2 8v...
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
i may be being stupid here but which location in the speedo plug does the green wire go?
gona have a look for the wire now
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
i have just looked in the engine bay at the plug shown in the above link and there is no green wire there? help lol
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
the green wire is near the ecu mate, get a multi metre on it and it will go mental when you earth it(pulsing)
be careful before you go cutting all sorts though as i found a few green wires that did this but caused the tacho not to work properly. as far as i can remember it is in a block of about six wires not the main block that goes into the ecu. couldnt find any sort of pulse wire in the engine bay at all.
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
cheers mate. will have a look in the morn and see if i can find nethin
|
tom_simes
Show Staff Organiser: South Wales Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=231702
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
cheers mate. now i know where the wire is, which part of the plug behind the dials does the wire need to go2?
|
tom_simes
Show Staff Organiser: South Wales Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
sorry, cant help on that, I used a 52mm gauge monuted in one of the vents rather than new dials.
Try the link in the post by Siberia though, and try to work it out from his pic of the plug.
Hope it helps!
|
Slammed_Corsa
Member
Registered: 30th Oct 05
Location: Greenock, Inverclyde
User status: Offline
|
James did you buy clocks with a mechanical speedo or electronic one?
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
electric mate
|