Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
How easy/hard is it? any guides at all? Thanks. 
|
wilson_sri
Member
Registered: 31st Aug 04
Location: Dunfermline Drives: Technics 1210s
User status: Offline
|
Sorry to charge into your post mate but also thinking about this. M-tech kit aswell?
Wondering if anyone can tell me how much of a differance it will make aswell?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
makes a big difference. and easy to fit. takes about 20 mins to do.
jack up car and put on axle stands.
remove the pin that joins the linkage to the rod on the gearbx
remove the pin clip that hold the linkage onto the gearbox mount
disconnect the linkage from the gearstick shaft
take out the complete linkage.
refit the quickshift linkage in the same method as removing it
set up the gear linkage to the correct position.
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
quote:
Originally posted by Dave A
makes a big difference. and easy to fit. takes about 20 mins to do.
jack up car and put on axle stands.
remove the pin that joins the linkage to the rod on the gearbx
remove the pin clip that hold the linkage onto the gearbox mount
disconnect the linkage from the gearstick shaft
take out the complete linkage.
refit the quickshift linkage in the same method as removing it
set up the gear linkage to the correct position.
Fooook that! 
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
|
wildkin
Member
Registered: 28th Aug 05
Location: Oslo, Norway
User status: Offline
|
do you change the whole original gearlinkage if youre fitting shortshift?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
no, just the metal s shaped bit
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
What sort of benefits apart from quicker changes are there ? 
|
CorsaGSI_DK
Member
Registered: 10th Jun 02
Location: Copenhagen, Denmark
User status: Offline
|
Same as from Rally Design: http://www.rallydesign.co.uk/catalog/product_info.php?products_id=2021
right?
|
shane2corsa
Member
Registered: 4th Sep 05
Location: Nettleham, Lincolnshire
User status: Offline
|
faster change = less revs lost during the change = faster car 
|
