Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
How do i change the time on it ? Mine is way out and i'm not really sure how to change it. I'm guesing it links in with the cd player somehow ?
Also the temperature gauge, how would i get that to work properly ?
[Edited on 10-02-2007 by Wonderboy]
|
pdwhelan
Member
Registered: 25th Sep 06
Location: Wigan
User status: Offline
|
hold top button in for a few seconds untill it flashes, then use bottom button to change the time then press top button to move along to next set 
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
Ok thanks mate, i'll go try it out.
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
Got the time and date working now. Thanks pdwhelan.
Does anyone know why the temperature gauge might not be working properly?
[Edited on 10-02-2007 by Wonderboy]
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
both my corsas the temp guage didnt work never really tried getting a new one. that should solve it
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
If the temp guage is reading --:-- then its more than likely the sensor behind the front bumper is disconnected or faulty.
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
Not it says a temperature, but it's totally wrong, it freezing outside and it's says something like 45 degrees. 
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
mine had the wires cut when i got the car joined them back up and it still doesnt work. looks like a new sensor then 
|
pdwhelan
Member
Registered: 25th Sep 06
Location: Wigan
User status: Offline
|
mine was the actual unit it self because mine would read -34 some times, changed it last week and its perfect, i thought it might of been the sensor. My new one doesnt display the time opr date either now when i have the cd player in, my old one never used to at first and i done somthing to the thing and it started working. Probably cut the right wire by accident or shorted somthing wich may of caused it to give the wrong readings some times and it would also just go off all together.
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
How do i get into all the wires for it and stuff ? To check it's plugged in. Do i have to take the dash out ?
I'll have a look in my haynes manual.
|
pdwhelan
Member
Registered: 25th Sep 06
Location: Wigan
User status: Offline
|
just take the two air vents out, use a screw driver carefully in both sides and pull it out, bit fiddly. then you will see two screws holding the unit in place, thats it. Its just one plug. 5min job
[Edited on 10-02-2007 by pdwhelan]
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
When i was out a drive there i noticed that the guage does change, it just doesn't show the correct temperature.
|
