Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
whats differnce between the 1.4 spi 8v 65bhp engine and the 1.4 mpi 8v 82bhp engine?
ECU/loom is different due to MPI, so inlet is different too
exhaust?
cylinder head?
Cam?
Bottom end the same?
reason im asking is because might be getting a SRI needing in an engine, so wondering weather i could just fit a 1.4 SPI engine and bolt on the MPI manifolds?
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
pretty sure the inlet ports are a different shape exhaust side of things is the same. is there an engine in the car already.
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
The SPi motor is 60bhp.
Heads different, cam's different, block's different.
You could use a SPI block and bolt on the Mpi head/top end etc.
Also need crank sensor/bottom pully etc too as some spi's dont have a crank sensor.
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
quote: Originally posted by Vaux Lad
You could use a SPI block and bolt on the Mpi head/top end etc.
Also need crank sensor/bottom pully etc too as some spi's dont have a crank sensor.
thats my thinking
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
I ran a mpi head on a spi block with no probs
|
shane2corsa
Member
Registered: 4th Sep 05
Location: Nettleham, Lincolnshire
User status: Offline
|
worth checking the local scrappy! i got my MPI out of a 5 door LS! shopping mobile but some o the 5 doors come with the mpi engine
would save a lot of hassle swapping parts over. that was my logic anyways
[Edited on 15-05-2007 by shane2corsa]
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
I want another C14SE SRi
|
shane2corsa
Member
Registered: 4th Sep 05
Location: Nettleham, Lincolnshire
User status: Offline
|
quote: Originally posted by Robin
I want another C14SE SRi
me too, legendary engine.
|
Mertin
Member
Registered: 12th Oct 05
Location: Scotland
User status: Offline
|
Are they good engines like?
|
dannymccann
Member
Registered: 9th Aug 06
Location: Doddington, Lincolnshire
User status: Offline
|
i got one how do you know whether you have got SPI or MPI?? Or am i being thick lol
|
gunzi
Member
Registered: 10th Feb 05
Location: Pompey
User status: Offline
|
IIRC Spi will look like a carb engine on the inlet side & mpis will have 4 injectors running into the inlet manifold. HTH
C14SE has a very good head and IMO is a stonking little engine for what it is.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
what car have the mpi 1.4 8v engines fitted too???
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
Early corsa sri
Nova sri
Mk3 astra
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
quote: Originally posted by Mertin
Are they good engines like?
They are.
I actually preferred my C14SE to my X14XE, it was a better car to drive, engine felt stronger, the C14SE had done 88k, the X14XE had done 9k when I first had it.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
i think i no what you mean, even though i haven't driven one!
more mid range/low down grunt, probley felt quicker,but wasn't realy!
am i right?
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
Yes 8v's have more low down pull and mid range, and a lot better throttle response( the 16v's 40ft inlet tract doesn't help that,lol)
16v more topend tho.
And ye, they do seem to last forever and never break, on most even if cambelt goes fit a new belt and it'll be good as new,lol.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
well dont need an engine now, his sold the car
ahh well looking at a gsi atm
|
cheekyalex
Member
Registered: 5th Jan 06
Location: liverpool
User status: Offline
|
i love my c14se.never let me down in the 18 months ive owned it.only problem i did have was the idle controll valve got got a bit cloged up,but wasy to clean.everything is pretty easy to access on them too
|
sam13
Member
Registered: 30th Dec 06
Location: manchester, sale
User status: Offline
|
i just rebuilt a 1.4 8v mpi cant wait to drive it down the road hoping i got most of the standard bhp back herd they pull very well for an 8v cant wait.
|
corsasriboy
Member
Registered: 23rd Mar 07
Location: leicestershire
User status: Offline
|
i love my c14se.absolutely superb little car.propa old skool power.puts a smile on my face every time.port and polish and a 4-1 manifold next i think!
|