m4cK
Member
Registered: 12th Sep 05
User status: Offline
|
Hi, im fitting a subwoofer in my girls car at the weekend and need some advise!! the plan is to run the power cable through the gromet that seems to lead to the back of the glove box, how hard is the glove box to remove ? is this the best way of running the cable ?? would be grateful for any replies !! cheers 
|
Behr
Member
Registered: 5th Feb 07
Location: Hemel Hempstead
User status: Offline
|
glove box is easy to remove, although i dont think you actually have to remove it,it should just drop down the back and IMO this is the easiest way to do it.
|
Planty02
Member
Registered: 5th Mar 05
Location: Burslem, Stoke-on-Trent
User status: Offline
|
Have a look in the tutorials section mate, theres a really useful guide in there. Sounds like you've got the right idea tho
The glove is fairly easy to remove, two screws at the bottom, two at the top and one in the middle inside
|
m4cK
Member
Registered: 12th Sep 05
User status: Offline
|
thanks for replies guys ! most helpful,
|
Behr
Member
Registered: 5th Feb 07
Location: Hemel Hempstead
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=154522
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
5 min job an 4 odd screws
getting the wire threw the grommet is the bitch though  v stressfull
|
Planty02
Member
Registered: 5th Mar 05
Location: Burslem, Stoke-on-Trent
User status: Offline
|
quote:
Originally posted by FruitBooTeR
5 min job an 4 odd screws
getting the wire threw the grommet is the bitch though v stressfull
I found the best way to do it is to tape the cable to a long screw driver, and push it through the grommit from the engine bay, then cut the tape off when the cable is through
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
quote:
Originally posted by Planty02
quote:
Originally posted by FruitBooTeR
5 min job an 4 odd screws
getting the wire threw the grommet is the bitch though v stressfull
I found the best way to do it is to tape the cable to a long screw driver, and push it through the grommit from the engine bay, then cut the tape off when the cable is through
yeh thts exactly wat i did but me being an idiot was trying to do it from the inside out to the enigne bay for a while
What a numpty 
|
paul.mitchell1984
Member
Registered: 31st Aug 06
Location: Wakefield
User status: Offline
|
iirc you dont need to remove the glove box or i didnt in mine its just above the carpet line may need to remove the passenger shelve thingy ma doofer though..
|
ashbishop90
Member
Registered: 19th Mar 07
Location: Leicestershire
User status: Offline
|
to get it through the gromit.
just an idea (if you havnt already done it.) straighten out a coat hanger, tape the cable onto it and it'll jus slide through.
It took 1 minute
|
Shane
Member
Registered: 10th Jan 04
User status: Offline
|
quote:
Originally posted by paul.mitchell1984
iirc you dont need to remove the glove box or i didnt in mine its just above the carpet line may need to remove the passenger shelve thingy ma doofer though..
you dont need to just makes life a little easier
|
