Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
what stroke are they (stock)
[Edited on 12-12-2007 by Ben ev]
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
Technical specifications of 1992 Opel Calibra Turbo Carfolio.com ID 24959
bodywork
Type 2+2 FHC
Designer
Number of doors 2
dimensions & weight
Wheelbase 2600 mm 102.4 in
Track front 1425 mm 56.1 in
rear 1430 mm 56.3 in
Length 4495 mm 177 in
Width 1690 mm 66.5 in
Height 1320 mm 52 in
Length:wheelbase ratio 1.73
Ground clearance
Kerb weight 1405 kg 3097 lb
Weight distribution
(Front) 57.00 %
Fuel capacity 63
litres 13.9
UK Gal 16.6
US Gal
aerodynamics
Drag coefficient 0.290
Frontal Area 1.93 m2
Cx 0.56
engine
Code
Manufacturer Opel
Type S-4
Wet sumped
DOHC
16 valves total
4 valves per cylinder
Main bearings 5
Construction
Bore × stroke 86.00mm × 86.00mm
3.39 in × 3.39 in
Bore/Stroke ratio 1
Displacement 1998 cc
(121.925 cu in)
Unitary capacity 499.5 cc/cylinder
Compression ratio 9.00:1
Fuel system Bo Mot 2.7 fuel inj.
Aspiration Turbo
Compressor type
Intercooler
Catalytic Converter Y
Max. output
(DIN) 203.8 PS (201.0 bhp) (149.9 kW)
@5600 rpm
Max. torque
(DIN) 280.0 Nm (207 lbft) (28.6 kgm)
@2400 rpm
Maximum rpm
Coolant Water
Specific output 100.6 bhp/litre
1.65 bhp/cu in
Specific torque 140.14 Nm/litre
[Edited on 12-12-2007 by Dave A]
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
cheers dave. very usefull.
also is the combustion chamber (stock) 43cc/cylinder?
last one. whats the deck height volume in cc's?
incase woundering trying to work out rough comp ratio using "assumption" figures
[Edited on 12-12-2007 by Ben ev]
|