Mobby
Member
Registered: 31st Dec 07
Location: Leicestershire
User status: Offline
|
how would i fit the electric windows, to my car? if i had all the bits, is the motor hard to do?
|
Limecat
Banned
Registered: 25th Jun 05
Location: The Internet
User status: Offline
|
I did it on mine, first thing first is to unscrew the loom which sits in the door shut area.
Count the number of pins in there as if the in car loom isnb't equipped with the wiring you are pissing into the wind.
You will then need to take your door bin and card off. To get the existing mechanism out you will find it has 4 rivets holding it in place; drill these out. Put the motor and mechanism back in it's place and either pop rivet it in place or with nuts and bolts after putting the slider onto the base of the window (you may need an extra pair of hands at this point!)
Put the electric door loom in and connect up.
It is more fiddly than difficult.
|
Mobby
Member
Registered: 31st Dec 07
Location: Leicestershire
User status: Offline
|
i imagend it would be fiddly, my cars the 1993 so it wont be prewired i dont think
|
Limecat
Banned
Registered: 25th Jun 05
Location: The Internet
User status: Offline
|
I recall correctly mine had something like 17 pins on the car loom side, if it hasn't got that you will have to do the in car loom as well.
|