x20xev mount - Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x20xev mount

New Topic

New Poll

Subscribe | Add to Favourites

You are not logged in and may not post or reply to messages. Please log in or create a new account or mail us about fixing an existing one - register@corsasport.co.uk

There are also many more features available when you are logged in such as private messages, buddy list, location services, post search and more.

James_H

Member

Registered: 16th Sep 07
Location: Slough, Berkshire
User status: Offline

31st May 08 at 15:06

hi my mate is looking to put a 2.0 16v ecotec engine into his corsa b with out power steering. are thay the same mounts as the c20xe ?

teddytopend

Member

Registered: 3rd Jun 06
User status: Offline

31st May 08 at 19:38

yes mount the same as the xe.

James_H

Member

Registered: 16th Sep 07
Location: Slough, Berkshire
User status: Offline

1st Jun 08 at 07:34

thanks!

GrolschWalsh

Member

Registered: 1st Sep 09
User status: Offline

10th Sep 09 at 20:49

Hi mate, let me know how you go about doing this - I am doing the same, i.e. putting a 2 litre ecotec in this wekend, have removed power steering, but have the problem that the tensioner is part of the power steering mount, which has too come off as the corsa b engine mount goes where it was... see my other post..... ( http://www.corsasport.co.uk/board/viewthread.php?tid=517709# ) let me know if / how you get around this!!!

ripley

Member

Registered: 15th Apr 08
Location: wales
User status: Offline

10th Sep 09 at 20:51

hi mate convert to v pully

http://www.corsasport.co.uk/board/viewthread.php?tid=512564&pid=6751504#pid6751504

[Edited on 10-09-2009 by ripley]

GrolschWalsh

Member

Registered: 1st Sep 09
User status: Offline

10th Sep 09 at 22:50

what do you mean by convert it to V pulley? Sorry if im sounding a bit simple on these matters, im not a mechanic, a bit of a have a go hero!

ripley

Member

Registered: 15th Apr 08
Location: wales
User status: Offline

10th Sep 09 at 23:07

iam running pas on mine, i set mine up with the XE setup double crank v pully and v pully alt.i put the ribbed belt setup on first and the alt was hitting the leg.so not a lot of room. what body type do you have 1 or 2?

GrolschWalsh

Member

Registered: 1st Sep 09
User status: Offline

11th Sep 09 at 08:03

OK, well assume you are ok then as have a tensioner? Do you have any pics? Mine is a type 2 shell....

What leg was your alternator hitting???

The engine is still on an engine crane at the moment as I didnt want to put it in to find it had to come out to get a belt to fit....

Can you do me a favour, and look at your engine bay, and tell me if you undid the top securing bolts, how far back the alternator could rock on the bottom axis without hitting the bulkhead? Cheers...

New Topic

New Poll