wayne_rob1
Member
Registered: 15th Aug 08
Location: Port Sunlight, Cheshire
User status: Offline
|
just clearing out spares i have around mine, ive got a c20xe engine removed from a calibra with 78k on it, but when i fitted it the car to my corsa it was mis-firing like a bitch so i stripped it down found 2 burnt out inlet valves checked the rings which looked rather new rebuilt it with new valves headgasket stemseals headbolts and oil pump, had it running sweat as a nut, until about a week later the bottom end was knocking slightly, so i stripped her down again found the crank was slightly worn could be sorted with a rework, and fitted new end bearings hoping to get away with it but i didnt , so ive bought a new crank which will come with the engine.... The engine is complete btw. comes with everythin to make it run including purple injectors and coil pack leads starter ecu loom and alternator, new cambelt and waterpump , brand new fly wheel and clutch, powercoated inlet manifold and fuel rail in arden blue looks mint all chrome covers polished not chrome dipped the engine runs mint apart from a slight knock from bottom end offers around 270 mark????? pictures will be up tonight
|