Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
Hello peepz. Time for a clearout, heres whats on offer atm (be sure to check back as i'll add more as i find it):
- X14XE Engine/gearbox/loom/ecu done 129k, ran like a dream and very well kept, didnt use any oil or water, had headgasket done at 125k. Produced 120.9bhp & 106.5lbft when last on rollers. All paperwork & receipts present. Kept up with 1.6 16v engines of same spec up to 80mph (mikey_J & MikeGSI)--- £150
- X10XE Gearbox, unknown miles but works fine --- £15
- X14/X16XE custom enlarged throttle body (enlarged as far as possible without breaching the wall around the butterfly, with new alloy butterfly machined to suit new bore size. opened out as far as possible leading up to butterfly with taper machined to improve flow) --- £45 SOLD
- Mantzel powerbox, powdercoated black with the mantzel letters lightly sanded to a shine. Includes EGR blanking plate & all fittings --- £220
SOLD
- Oil catch tank w/breather filter. Mild steel construction with stainless inlet & outlet pipes & m10 drain plug. Professionally painted in satin black. Designed to bolt onto SAI pump studs, includes mounting bracket painted in flame red --- £30
- X14XE Cylinder head. Currently stripped with all valvetrain parts present & numbered. Cams not included. VGC --- £50
- X16XE Cylinder head. Fully assembled. Removed from running engine --- £60
- X16XE complete bottom end. Done 54k miles. Bores have practically no signs of wear, crankshaft does need a regrind w/oversize shells. Otherwise VGC, all parts and fittings present including flywheel. --- £50
- Shortshift linkage, purchased from ebay last summer, in VGC. As far as i know fits all corsas apart from XE/LET conversions --- £15
- Custom made spark plug cover, profesionally painted in satin flame red --- £10
- X14/X16XE rocker cover, profesionally painted satin black --- £20
- X14/X16XE thermostat housing, professionally painted satin flame red --- £10
- X14/X16XE stainless 4-1 manifold. Custom modified (OE flange cut off and stainless flexi welded inplace to allow direct fitment to 2 1/4" bore system) --- £60
- SRi cable driven clocks (w/rev counter) all works fine --- £15
- MPi fuel pump, in perfect working order --- £10
- GSi front seats. Few marks on back, rip on drivers side bolster. come with subframes --- £10 for the pair
- Sport front seats. Coloured dot pattern, removed from X Reg corsa. Come with subframes. Mint condition with no rips or marks --- £30
- 2ltr brakes. Calipers/carriers & discs all fine, will want new pads though --- £20
- Dbilas vernier pullies. For X14/X16XE engines purchased from Regal Autosport last year, fitted to car and used for about half an hour, few marks only from where the screws have been tightened --- £90 SOLD
- X14/X16XE 270 fast road cams. Reground from X14XE cams. Used for about half an hour so still in mint cond. Still have receipt from the machining work --- £80 SOLD
- 4.5" slashcut inward roll stainless backbox. Made by custom chrome, "muff diver" engraved on tail pipe --- £15
- 3.5" outward roll stainless backbox, made by powerflow --- £15 PROVISIONALLY SOLD
- X14/X16XE upper & lower inlet manifolds --- £15 for the pair
- Grey dashboard --- £15
- Pre 97 front & rear bumpers bare plastic --- £10 each
- Pre 97 front bumper painted in flame red. Not the best paint job, however looks fine once fitted to car --- £10
- Post 97 rear bumper, bottom half painted black. Few small scuffs --- £10
- Black plastic sideskirts, unsure on make for corsa B. bare plastic and been rubbed down ready for fitting/painting --- £20
- Tigra front bumper, small scrack near grille but easily repairable, painted red --- £30
- Pair of standard corsa tail lights, no chips or cracks --- £10
- Pair of standard corsa headlights, no chips or cracks --- £10
- Pair of standard corsa mirrors. Painted in flame red, gone a bit pink lol --- £10
- JBL 12" GTO sub in box. Mint condition --- £30
- Custom boot build for a corsa to suit 15" sub. Carpeted and built solid as a rock. enough space to fit 2 pro plus nemesis amps and a 4 channel audio systems amp + the sub itself of course. covers complete boot floor & designed to bolt down to spare wheel bracket so it doesnt vibrate or slide. MDF construction, box braced internally with timber for strength --- £50
- Decat pipe. Fits standard X14/X16XE systems, mild steel construction. perfect condition --- £25
Like i said i may add more as i find it, so keep checking back 
Pics available of everything listed, however i'm still on dial up so couldnt upload them all into this thread at once
U2U for prices on postage, although a lot of this stuff is better to be collected due to size & weight
Cheers peepz 
[Edited on 04-05-2009 by Will94]
[Edited on 04-05-2009 by Will94]
[Edited on 04-05-2009 by Will94]
[Edited on 04-05-2009 by Will94]
[Edited on 04-05-2009 by Will94]
[Edited on 06-05-2009 by Will94]
[Edited on 06-05-2009 by Will94]
|
hughes-2k8
Member
Registered: 9th Dec 08
User status: Offline
|
how much for 3.5" outward roll stainless backbox £30 posted mate
[Edited on 04-05-2009 by hughes-2k8]
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
I can do that for 30 posted buddy, if thats what ya askin? lol
Not sure if the pipe will need modifying to fit your system though, it was orignally made for an XE converted corsa, then i adapted it to fit my standard system.
Just pre warning you, although i'd have thought it'd b ok
|
hughes-2k8
Member
Registered: 9th Dec 08
User status: Offline
|
yehh shud be okay makein my own decat and center section gettin it all done at the same time so will beable able to sort it
pm me your paypal or however you wud like paying and will get paymen off to you as soon as i can mate
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
U2U'D
|
djgritt
Premium Member
Registered: 1st Nov 07
Location: Dorset Drives: Focus ST / Hyundai i20N
User status: Offline
|
U2U Sent
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
u2ud
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
Requested pics so far
Oil catch tank, mounting bracket & spark plug cover. Great condition, just need a clean
Powerflow backbox
Englarged TB sitting next to standard TB
Reground 270 cams
Dbilas vernier pullies
Shortshift linkage
Stainless manifold. The bottom half is just tarnished with burnt on road grime from the roads i travel on (no its not rust lol) please excuse the bird poo... it was outside for the last week and the birds obv dint like it under the tree 
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
I should add that the englarged TB has had 3 of the 4 mounting holes drilled out as it was fitted to a Mantzel
|
pj.b
Member
Registered: 8th Oct 08
User status: Offline
|
If the vernier sale falls through I'll take them, might take the catch tank too.
[Edited on 04-05-2009 by pj.b]
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
Okies dude. Watch this space
|
pj.b
Member
Registered: 8th Oct 08
User status: Offline
|
Cheers, can you let me know asap as I need to order some new ones otherwise.
Thanks.
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
Cams,Verniers & TB SOLD To Me
Just Payed now Mate!
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
quote:
Originally posted by Craig P
Cams,Verniers & TB SOLD To Me
Just Payed now Mate!
^ like he said lol
Was then about to post that information... he got there 1st lol
Up
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
quote:
Originally posted by Will94
quote:
Originally posted by Craig P
Cams,Verniers & TB SOLD To Me
Just Payed now Mate!
^ like he said lol
Was then about to post that information... he got there 1st lol
Up
I just couldnt wait Mate
|
james_suffolk1
Member
Registered: 1st Mar 08
Location: NUNEATON CV10
User status: Offline
|
how much for back box delivered??
n have u got a pic of 4.5" slashcut inward roll stainless backbox. Made by custom chrome, "muff diver" engraved on tail pipe
[Edited on 04-05-2009 by james_suffolk1]
[Edited on 04-05-2009 by james_suffolk1]
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
quote:
Originally posted by james_suffolk1
how much for back box delivered??
n have u got a pic of 4.5" slashcut inward roll stainless backbox. Made by custom chrome, "muff diver" engraved on tail pipe
[Edited on 04-05-2009 by james_suffolk1]
[Edited on 04-05-2009 by james_suffolk1]
I'm afraid this one is provisionally sold dude, i shall let you know if the sale falls through though.
As for the other backbox, i'll take a pic tomorrow and post it up here
|
james_suffolk1
Member
Registered: 1st Mar 08
Location: NUNEATON CV10
User status: Offline
|
cheers mate
|
Behr
Member
Registered: 5th Feb 07
Location: Hemel Hempstead
User status: Offline
|
hi mate will the 4-2-1 fit a standard x14xe system?
|
hughes-2k8
Member
Registered: 9th Dec 08
User status: Offline
|
Bump for good seller nearly done sorting payment
|
aaronc190
Member
Registered: 19th Aug 08
Location: ireland
User status: Offline
|
how much for the gearlinkage posted to ireland??
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
quote:
Originally posted by Behr
hi mate will the 4-2-1 fit a standard x14xe system?
Not straight up m8...
i welded a 2 1/4" flexi joint onto it so it can mount to a 2 1/4" system with no bottlenecks, would need to make some kinda adapter to fit it to a standard system. i do have a cat which i modified to fit which i guess i could bundle in with it if the price was right :lol"
its a 4-1 aswell btw not a 4-2-1, jus 2 clear up any confusion
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
quote:
Originally posted by aaronc190
how much for the gearlinkage posted to ireland??
I'd best check on that one buddy... i'll get back to ya asap
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
Pics of "muff diver" exhaust as requested:
Evidently its in need of a good clean 
|
