Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
I have all the guides - But only 3 wire cvolours match!
There's 3 Thin blue / Red wires on my Original loom, but only one on the XE loom - Do i join them all?
All the colours are different - Any guides for the 1.2 16v about?
Cheers
EDIT: In the engine bay, I also have a wire in between the Dizzy plug and injectors sticking out - It has a bullet connector on it already - Where does this one go?
I'm almost there, just need a 16v start and charge and the rest of these wires in and i'm all go 
End of the XE Loom - What do i do with the Block bit, Whats the 3 pin plug with only 2 wires for, and I'm assuming the Black coated red wire goes to Live?
What about this Bullet connector? - Its in between the Dizzy plug and the Injectors.
How about this 2 pin 1? - Splices off where the headlight plugs in on the drivers side - There's not one on the passenger side...
Inside the car - 3 pins on the 6 pin one (only 5 wires), are to the transducer I believe - Whats the other 2? and what about the long 5 Pin plug?
These are the wires left on the XE Loom
These are the Wires left on my loom
Another 2 Black Connectors...?
EDIT: Also, Where in the loom does the Llambda sensor plug in? - I can't see anywhere unless its the 3 pin plug in the pics further up with only 2 wires... - Also, is there away around not using one, as i don't have one?
Cheers
[Edited on 08-07-2009 by Davidkent]
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
Have a look here
http://www.corsasport.co.uk/board/viewthread.php?tid=507494
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
Cheers buddy - Shame i can't make out my car end... Its being a gay - There's 3 red and blue thin ones on the car end, and only one on the XE loom end - Thats just the start! lol
Anyone already got a 1.2 16v thats converted that could get what wires go where for me?
Cheers
|
lee mitchell
Member
Registered: 26th Jan 01
Location: kent...drive's: eveyones conversion cars hard lol
User status: Offline
|
i posted how to do it in partyvans post. follow that
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
Awesome - I'll try find it
Cheers bud
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
Can't find it mate?
|
lee mitchell
Member
Registered: 26th Jan 01
Location: kent...drive's: eveyones conversion cars hard lol
User status: Offline
|
that first pic is fuel relay plug. ron plug and the other to battery
|
lee mitchell
Member
Registered: 26th Jan 01
Location: kent...drive's: eveyones conversion cars hard lol
User status: Offline
|
also bullet connector is ign live and 2 pin plug on drivers side is fan switch. six pin plug is for transducer, alternator wire and starter wire. u need to get that back in the bay
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
quote:
Originally posted by lee mitchell
that first pic is fuel relay plug. ron plug and the other to battery
Ron plug?
Need a relay for the fuel then, no problem.
Other to battery Live.
Transducer wires are now extended back to the plug in the car, and the Starter and alternator ones are half done so almost there..
So the bullet connector in the bay needs to go back into the car then? and to where?
Can't find that thread you said you'd posted it all up in - It'd be perfect then, I'd have it all done on monday, my next day off!
Cheers buddy
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
And fan switch? The fan plugs in on the passenger side though.. or have i missed something lol
|
lee mitchell
Member
Registered: 26th Jan 01
Location: kent...drive's: eveyones conversion cars hard lol
User status: Offline
|
bullet connector goes to an ign live anywhere on car, ron plug. little brown plug with a on oneside b on the other. the fan plug is on passenger side but the switch is in the rad drivers side
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
SO whats the RON plug?
Obv is that one in the pic with the fuel relay socket, but where does it go, whats it for?
And You mean the bullet connector in the bay by the battery - And that goes to any Ignition live? = Any suggestions?
Ah, My rad has a different socket to the plug for that switch - Customize time me thinks!
Cheers
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
up..?
|
