evans_corsab
Member
Registered: 23rd Sep 08
Location: Cheshire.
User status: Offline
|
hi there , iv just had to buy a new head for my xe , thing is its running a coilpack , whereas my set ups for a dizzy , iv changed the pulleys to my old ones , but when i come to fit the dizzy theres the hole for the stud on the dizzy and the stabilizer shaft but it doesnt go in the cam as its like theres a ball in there , what should i do as i dont really want to change the cam . thanks
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
change the cam is only option unless you fit the dispack and change the loom and ecu and afm etc to suit?
|
evans_corsab
Member
Registered: 23rd Sep 08
Location: Cheshire.
User status: Offline
|
hmm dont really want to swap the cam  , theres the hole for the dizzy shaft but it only goes in a tiny bit , may just hack the bar down 
|
davieslim
Member
Registered: 15th Sep 08
Location: Glasgow City
User status: Offline
|
as nick said only option would be to either change the cames over or change the loom and ignition set up to dizzyless
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
if you cut the dizzy shaft then it wont do it any good. it will move about more than its likely to already. which dizzy is it? Electronic or vacuum advance?
|
evans_corsab
Member
Registered: 23rd Sep 08
Location: Cheshire.
User status: Offline
|
its the bosch electric one 
|
Alex_Rally
Member
Registered: 6th Sep 09
Location: Tyne and Wear, gateshead
User status: Offline
|
sorry to butt in .... which is the best one to buy mate dizzy or coil pack engine ???? are they both 150bhp????
|
