Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
As i dont have a car worth making a project thread for im spending all my spare time refurbing my Schmidt Modernlines (15x8) so thought i would make a little build thread (something a little different)
had them on the silver mk1 gti i just got rid of.. (picture is of the best wheel but still the picture does the wheels some justice)
couple of close ups to show the condition (every wheel was atleast this bad)
spent around 8 hours so far, refurbed the lips and polished the dishes (only done 3 wheels so far, and only up to 1200 grit wet and dry, plan to do them with 1500 and 2000 as theres still some fine marks from the 1200)
80 grit on to take the worst marks out
240 to flat out most the marks the 80 grit left and so forth..
400
600
1000
1200
then went over with autosol by hand, then autosol mixed with polishing compound via a mop head/drill..
heres how they looked when i had done the above..
as said, still have to do the last alloy, then will source some 1500 and 2000 wet and dry to finish off the dishes, then move onto sorting the centres.. (not polishing the centres)
|
Wrighty
Member
Registered: 28th Feb 04
Location: Howden
User status: Offline
|
what offset and width are they, i know someone after a set for a nova
|
Jamie-C
Member
Registered: 3rd Jun 08
Location: Ballycastle
User status: Offline
|
Refurbing to sell or fit to the next project?
Love these wheels, should look good once done
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
there et25 8j all round
but there not forsale, well not yet anyway, planning on having them for my next car, but if some reason i dont then they will be forsale in the future..
[Edited on 31-03-2010 by mk4_boy]
|
ClaytonOtway
Member
Registered: 31st Jan 09
Location: Spalding
User status: Offline
|
180/400/machine polish = perfect mirror finish
|
mattfiesta
Member
Registered: 14th Jul 05
Location: Nottinghamshire
User status: Offline
|
My brother has the same wheels in the same size and polished his while they were on the car, jacked up and sat in 5th. If you need any spares hes got 3 for sale after taking a chunk out of one in the snow.
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
u2u'd..
|
Bonney
Member
Registered: 14th Nov 04
Location: St Helens
User status: Offline
|
When i did a few bits for the bike, I used what is called a trizact pad after the 1500 sand paper then polished with autosol. Seemed to help with the polishing of them.
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
yh im planning on doing 1500, 2000, autosol then mothers metal polish then seal them..
unsure on what colour to do the centres..
|
Jamie-C
Member
Registered: 3rd Jun 08
Location: Ballycastle
User status: Offline
|
Wait and see what car you buy next then decide depending on the colour of it.
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
99% will be getting a black car next jamie..
|
Jamie-C
Member
Registered: 3rd Jun 08
Location: Ballycastle
User status: Offline
|
quote: Originally posted by mk4_boy
99% will be getting a black car next jamie..
Ah, that makes it harder Just about any colour will go with black
|