westcoastcorsa
Member
Registered: 26th Jun 08
Location: cumbria / york
User status: Offline
|
need to put a new seat belt tensioner on my corsa, just wanting to know how hard and whats needed for removal of the seat and seat belt pre-tensioner, cheers
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
torx bits, and remember to put the key in the pre-tensioner
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
oh and remove it once you have fitted
|
westcoastcorsa
Member
Registered: 26th Jun 08
Location: cumbria / york
User status: Offline
|
quote:
Originally posted by am4nf
oh and remove it once you have fitted
what if there isnt one 
key that is
[Edited on 18-05-2010 by westcoastcorsa]
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
get one from a scrappies or something
|
westcoastcorsa
Member
Registered: 26th Jun 08
Location: cumbria / york
User status: Offline
|
i am new to all this lol
will go the scrappy and try and dig one out
cheers
|
ali_corsa
Member
Registered: 30th Jun 07
Location: Tamworth Drives: Focus st
User status: Offline
|
40 torx to get the whole seat frame out might need a racher or battery gun
|
tomt08
Member
Registered: 8th Feb 08
Location: Sheffield
User status: Offline
|
Remove the sill plastics at the side of the seat to do this lift the flap and there shud be two t25 screws then there is one behind the seat on the same piece of plastic and one in front. Once you have done this take the plastic out of the way and move the seat forward. Place the clip in the pretensioner. Then there are two t40 torx screws one at the end of either rail behind the seat, undo both of these. Then move the seat back lift it at the back and push forward this should now be off all the mount and you can remove it from the car. Fit the new pretension remembering to put the clip in and then putting the seat back is the opposite of removal. However make sure you remember to take the clip back out of the pretensioner once youve finished
[Edited on 18-05-2010 by tomt08]
|
Mr Turner
Member
Registered: 20th Oct 07
User status: Offline
|
Realise this is old but i need to replace the seat belt pretension on my corsa b. What is the clip that keeps getting mentioned and what does it do? Thanks.
|
corsa-torque
Member
Registered: 15th Mar 11
User status: Offline
|
It's a red fork of plastic, and I'd truly advise fitting it before removal, otherwise it may go off and trust me it goes with a bang, left me with a ringing in my ear for hours.
|
Mr Turner
Member
Registered: 20th Oct 07
User status: Offline
|
The only red fork like clip i can see is at the rear of both the drivers and passengers seat attached to what i assume is the pretensioner. My question is when the pretensioner is fitted and working correctly should the red clip be fitted? As mine are? Or should they be removed as mentioned in this thread?
|
Haimsey
Premium Member
Registered: 8th May 05
Location: Nottingham Drives: Corsa B
User status: Offline
|
quote:
Originally posted by Mr Turner
The only red fork like clip i can see is at the rear of both the drivers and passengers seat attached to what i assume is the pretensioner. My question is when the pretensioner is fitted and working correctly should the red clip be fitted? As mine are? Or should they be removed as mentioned in this thread?
The red fork should be removed once it is back in situ.
Marcy Marc 
White Sport Progress Thread
|
