Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
Helppp
|
.Matt
Member
Registered: 28th Jan 09
Location: Kent
User status: Offline
|
make sure remote wire is connected to ignition wire not battary.
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
have youj wired in the remote cable properly?
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
i have taken the remote out so its not even connected and it stays on?
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
have you got a picture of your amp with the wires connected up?
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
both amps are staying on when the fuses are taken out they go off....the wires are in the right slots....What you getting at?
|
Andy H
Member
Registered: 13th Jun 10
Location: sunderland
User status: Offline
|
try putting the remote cable onto the aerial cable behind the head unit (blue and white one) use a volt meter and check when you turn the head unit on and off the voltages to make sure its cutting it out.
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
even if i did that surely if removing the remote full stop would stop it from being on right? but when i do remove the remote it is still on....
|
*JonnyG*
Member
Registered: 2nd Jun 08
Location: Lincolnshire
User status: Offline
|
The remote cable, tells weather to turn the amp off and on! You will need this else your battery will go flat!
|
Andy H
Member
Registered: 13th Jun 10
Location: sunderland
User status: Offline
|
if you don't have the remote on it will be on constantly, when the remote is connected, is acts as a switch and controls your amp
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
Oh i understand thank you for the detailed explanation  it helps understand the problem  Im gunna get a switch then for my remotes and it should solve the problem ill let you know....
|
arizona ste
Member
Registered: 15th Jan 10
Location: Delves, County Durham
User status: Offline
|
you shoudlnt need a switch for the remotes if you put it on remote at the back of your headunit it will send power to the amp when the cd players on but i dont understand how not having the remote connected still powers the amp and when you say remotes does that mean you have wired 2 amps in it must be getting another live from somewhere else
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
Righttt from battery - One power to a dual power distrabutor spltting to powers to seperate amps....each remote cable has been seperate from an amp to be joined to the head unit remote via choc bloc....each amp has a seperate ground....
|
sri_baby
Member
Registered: 17th Feb 08
User status: Offline
|
try putting a switch on the live wire to the amps ya can mount them on the dash
|
