ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
not anything crazy nd to be good for standard arches
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
wrong section or you after pics?
you will only be able to go to about 8j or something on oem steels and then you will have to mod standard arches (cut bolts off, pull arches out then bond trim back on)
i say get something different and make them fit..
[Edited on 30-09-2010 by Minty_Fresh]
|
Jamie-C
Member
Registered: 3rd Jun 08
Location: Ballycastle
User status: Offline
|
Theres a set on ED38, http://www.edition38.com/forums/index.php?showtopic=335348
I think you need to be logged in though.
This is the ad,
[quote name='edgie' date='29 September 2010 - 03:16 PM' timestamp='1285769773' post='3142336']
Here i have my black 15x8 banded steels.
They were originally on mini with 15x5.5, et45 and centre bore 56.1
They are now 15x8, et13 and centre bore 57.1
They all have 195/45/15 tyres, 2 federals and 2 nankangs with loads of life left.
Located in shropshire
Looking for around £450
On my old golf with a 5mm spacer outback
On my jetta
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
I'm telling you if I was a half decent plater and had the equipment I'd be knocking these up by the bucket load. £450 for a set of steelies with a bit of welding, fuck me.
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
mmmmmmmmmmmmmmmm jetta
|
Steve
Premium Member
Registered: 30th Mar 02
Location: Worcestershire Drives: Defender
User status: Offline
|
blame the sCeNe kids
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
DO USE THINK THESE WOULD BE SUITABLE FOR A CORSA WITH STANDARD ARCHES I REALLY WANT A SET BUT DONT KNOW ALOT ABOUT THEM AND DNT WANT TO SPEND ALL THAT MUNY AND THEY DNT FIT HAHA
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
quote: Originally posted by Minty_Fresh
wrong section or you after pics?
you will only be able to go to about 8j or something on oem steels and then you will have to mod standard arches (cut bolts off, pull arches out then bond trim back on)
i say get something different and make them fit..
[Edited on 30-09-2010 by Minty_Fresh]
i wasnt thinkin of goin any wider to be honest 7 and a half would have done me
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
et13 is major init
|
LukeD
Member
Registered: 23rd Jan 07
Location: Shropshire
User status: Offline
|
Those banded steels above will be far too wide. If you want 15inch, you could easily go 8j, but will need to start of as a high ET. A vaux steelie pref. I had 8j 15inch- pics in garage. Your best bet will be to get them made up for your spec as it will be hard getting the sizes you want.
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Just don't be gay and spend £450 on a set of flat faced 16" MOs
|
blacksheepdesigns
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 29th Aug 10
User status: Offline
|
i can get banded steelies made up
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
quote: Originally posted by alan-g-w
Just don't be gay and spend £450 on a set of flat faced 16" MOs
wat they like
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
didnt notice 1st time round u can c the joint in them fuck that
|
jimmy 2.1
Member
Registered: 17th Oct 05
Location: Shipley, West Yorkshire
User status: Offline
|
If you had them powder coated or smoothed like me and Luke had with ours you wouldn't see the band.
If you think just buying a set of banded steels and sticking them on will be easy then they aren't the wheels for you. Needs a bit of thinking to get them to fit or get ones made to your spec.
|
blacksheepdesigns
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 29th Aug 10
User status: Offline
|
quote: Originally posted by ryan docherty
didnt notice 1st time round u can c the joint in them fuck that
on about 95% of sets you can see the joins, they need smoothing and painting/powder coating so you don't see the joins
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
quote: Originally posted by jimmy 2.1
If you had them powder coated or smoothed like me and Luke had with ours you wouldn't see the band.
If you think just buying a set of banded steels and sticking them on will be easy then they aren't the wheels for you. Needs a bit of thinking to get them to fit or get ones made to your spec.
THATS WHY IM DOIN ALOT OF RESEARCH 1ST BEFORE A FORK OUT A WASTE A MONEY HAHA
ANO THEY WOULD NEED TO BE PERFECT AND PROB HASTLE BUT I REALLY LIKE THEM AND THATS WHY IM DETERMINED TO GET A SET
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
WOULD PLAN ON GETTING THEM POWDERCOATED ANYWAY SO THATS NO HASTLE THEN
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
quote: Originally posted by LukeD
Those banded steels above will be far too wide. If you want 15inch, you could easily go 8j, but will need to start of as a high ET. A vaux steelie pref. I had 8j 15inch- pics in garage. Your best bet will be to get them made up for your spec as it will be hard getting the sizes you want.
were ures vauxhall steels and did they sit ok with no rubbing ect.
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
quote: Originally posted by ryan docherty
quote: Originally posted by alan-g-w
Just don't be gay and spend £450 on a set of flat faced 16" MOs
wat they like
Same as them, don't think they're as widely available as I thought though. Would have thought that there would be a set 2nd hand for about that.
|
ryan docherty
Member
Registered: 27th Aug 09
Location: glasgow (coatbridge) or little ireland
User status: Offline
|
they are terrible man nt euro in the slightest are they nt mos
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Aye that's why I said get a set of 16" MO's
That's the kinda thing I'd get with the money anyway, faire enough.
|