big eck
Member
Registered: 20th Apr 03
Location: Tullibody. Drives - Audi B8 S4 & Fiesta Zetec-S
User status: Offline
|
I personally wouldn't want to start hacking bits of metal off my suspension but if it makes no difference at all to the handling then you can just go for it.
I suppose it's no different in cutting your arches apart for bigger wheels lol.
|
stan_the_man
Member
Registered: 14th Feb 07
Location: Perth, Western Australia
User status: Offline
|
Just cut it! I'll bring a hole saw, some beers and we'll go at it! I'll even mop your brow haha.
If you use a conical grinder bit on the end of a drill,that would do the trick surely?
|
stan_the_man
Member
Registered: 14th Feb 07
Location: Perth, Western Australia
User status: Offline
|
one of these
|
sand-eel
Member
Registered: 15th Mar 07
Location: carluke/braidwood--IRNBRULAND
User status: Offline
|
Its extremely normal to cut the turrets holes bigger, also if they take out the strut and adjust it, they will need to do that loads of times to get it stop on, which I don't see them doing that.
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Stan, that's a step up drill not a grinding bit. If you're going to use anything like that you want a TC cutter, something like this: http://www.google.com/products/catalog?hl=en&rls=com.microsoft:en-gb:IE-SearchBox&rlz=1I7GGLL_en-GB&biw=1259&bih=606&q=tungsten+carbide+cutter&um=1&ie=UTF-8&cid=3022436352471317702&ei=ecRHTd2KK4-bhQfm5rSNBQ&sa=X&oi=product_catalog_result&ct=result&resnum=9&ved=0CI4BEPMCMAg#
Bit of wood bolted to the underside is the best suggestion so far in my book.
|
Gary
Premium Member
Registered: 22nd Nov 06
Location: West Yorkshire
User status: Offline
|
Get a hole saw on it and stop messing about!!
quote: Originally posted by Ian
You can't use a hole saw, there's no pilot hole.
Unless it's a tight fit inside the strut brace it'll just shake about and rag everything. If it is a tight fit it'll mark the strut brace.
You would be better removing the strut brace and bolting it a blank which is marked for the hole saw.
The only reason not to cut is strength. Resale value is largely unaffected. I've never checked anything like that when I've bought a car. If it's cut cleanly and treated properly you wouldn't even notice on inspection.
I would have said it'd be ok as there is the channel all the way round to stop movement.
Failing that. Get a bit of ply and bolt it underneath! so you have a pilot hole.
Fucking about with gay grinding bits will just make for a messy job.
Hole saw and some cutting oil FTW
Cutting oil is definatly needed too!
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Won't be that thick I wouldn't have thought, bit of wd-40 on it wouldn't hurt though.
|
a_j_mair
Member
Registered: 23rd Jan 04
Location: Scotland
User status: Offline
|
people saying to bolt a bit of wood to the bottom
This will require the struts to be removed, like what the garage are going to do to adjust them, not much point drilling it if you are going to remove the strut anyway
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Obviously you'd want to remove the strut if you're cutting the strut top. It just means that he'll only need to remove them once instead of every time he needs them adjusted.
|
Ben G
Member
Registered: 12th Jan 07
Location: Essex
User status: Offline
|
why not contact bc and ask how you're meant to adjust the camber on the coilovers when they are already on the car?
bit silly if you can't.
|
Graham88
Member
Registered: 16th Apr 07
Location: South East Kent Drives: E46 M3
User status: Offline
|
Obviously the strut will need dropped to drill it, otherwise the pilot bit on the drill will be drilling through the coilover, but as mentioned then I can just do that in my own time, only takes 20 mins anyway.
Might do that Ben, I've gotta wait a couple of days before being able to borrow the drill bit anyway.
|