Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
whenever I put my washer jets on on the motorway the last few months they are sh!te, they are sometimes ok on a standard road but even then they are not 100% quite dangerous on the motorway though. Do you think it could be the motor ? if it is how much to buy a new one ? is it the one in the top left side of the engine (drivers side ) the one that controls the wiper arms too, any help hugely appreciated if its the motor I am going to get to a vauxhall garage for a new one before I go to the match at 11, many thanks, Paul....
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
ur better off getting a washer motor from a scrappies, gonna b a lot cheaper than vauxhall prices
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
what motor is it mate is it actually on the washer jets or is it the one on the drivers side feller. cheers how much do u reckon it will cost me
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
the washer motor is attached to the washer bottle in the engine bay - its a nightmare to get out as u have to take all the bottle out. i got charged a tenner for a washer motor
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
where from the garage or the scrappie mate going to pop out now and get one if I can
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
get one from a scrappy as vauxhall will rape u on the price of one
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
just phoned up MY GOD £30
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
was that from vauxhall
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
yes it was just over 30 quid from the local vauxhall garage what a rip off I am going to give a local spares dealer a ring and failing that I am going to visit a scrappy tomorrow
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
just phoned up £10.95 what a saving for the price of one more phone call
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
5 minutes driving 15 minutes to fit it I am well chuffed now, now I am off to see Leeds kick Spurs butt
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
nice 1 m8
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
a washer motor brand new is only about £16.50 from Halfords, I brought one the other week thinking mine had gone, so I took it all apart replaced it and it still wouldnt work.
It turned out to be a build up of gunge where the stalk of the motor goes into the bottle, I washed it otu and ti works fine now,
oh I had similar symptoms to u
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
I am gutted still doesnt work propperly, heres me thinking I had cracked it and I havent at all. I am going to spend the day tomorrow on me car going to wash it and sort it out got to take a few bits off that I have sold to people then I will try and sort this b@stard out cars going to be off the road for a while so have time now to get it all sorted
|
Corsa_A1
Member
Registered: 31st Mar 03
Location: Brum
User status: Offline
|
look at lees post m8....try that?
|
someone
Member
Registered: 13th Aug 02
Location: Surrey
User status: Offline
|
wouldnt of thought it was the motor as it still worked but not good you would know if it doesnt work as it does not make a noise.
the problem is probley what lee says it is gunk down the pipes
or your pipe has a leak so loses power
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
right if there is a leak in the pipe then do I need to get a new pipe or can it be repaired if so how much if not how much will it cost me for a new one
|
mattyboy199
Member
Registered: 5th Feb 03
User status: Offline
|
Could be clogged my mk 3 astra done that once
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
does nop1 ever read my foOKin posts, Ive had the exact same problem it'll be a build up of gunge in the hole where the motor stalk goes, thats what mine was as I said above, but no1 listens to me
Clean it with a water spray thing or high powered hose untilits a plastic guaze again
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
and to check if its the pipes, after u've cleared or if it already is clear the actual bottle, then take of the washer jets and suck through the water, if it wont come then eaieest thing cause they're not expensive is just to get new pipes which r clear from Halfords
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
right I have cleaned out the washer bottle and it still aint working so I am going to have to get the pipes mate thanks for yer help how much are the pipes ?
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
cant remember exactly, have u tried just taking the pipe off the motor and the jet off the other end, get a mouthful of water and then blow it as hard as u can down the pipe, it might be as simple as an airlock or blockage
|