corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Regional Groups & Events » North East » c20xe/let breather mod


New Topic
New Poll 		  Subscribe | Add to Favourites

You are not logged in and may not post or reply to messages. Please log in or create a new account or mail us about fixing an existing one - register@corsasport.co.uk

There are also many more features available when you are logged in such as private messages, buddy list, location services, post search and more.


Author c20xe/let breather mod
john_redtop
Member
Registered: 31st Dec 08
Location: acklam middlesbrough
User status: Offline
10th Aug 11 at 16:42   View User's Profile U2U Member Reply With Quote
Anyone done it before people have said you see a massive difference in performance as sometimes in high gear at low speeds mine does judder sometimes and this is ment to stop it http://www.pngclub.com/forum/showthr...E-Breather-Mod also on some forums its been you can do it to a cossie said
mantamark
Member
Registered: 19th Jun 06
Location: Northumberland
User status: Offline
10th Aug 11 at 18:05   View User's Profile U2U Member Reply With Quote
Ive got a rocker already done painted in ford grey you can have for £25 if you want to try it. If its no better then sell it on.

I thought it was mainly for oil starvation when high speed cornering.
Mieran
Member
Registered: 28th Jan 08
Location: Newcastle upon Tyne
User status: Offline
10th Aug 11 at 20:27   View User's Profile U2U Member Reply With Quote
Its to stop your car smoking when cornering hard, thats all
john_redtop
Member
Registered: 31st Dec 08
Location: acklam middlesbrough
User status: Offline
10th Aug 11 at 20:51   View User's Profile U2U Member Reply With Quote
So its pointless then realy
Mieran
Member
Registered: 28th Jan 08
Location: Newcastle upon Tyne
User status: Offline
10th Aug 11 at 21:13   View User's Profile U2U Member Reply With Quote
Well it doesn't cost anything so might as well do it
Crana
Member
Registered: 20th Jan 09
Location: Newcastle
User status: Offline
10th Aug 11 at 21:21   View User's Profile U2U Member Reply With Quote
Done it on mine and it stopped the batman car effect around corners
daveybee
Member
Registered: 1st Nov 07
Location: tyne and wear
User status: Offline
10th Aug 11 at 23:06   View User's Profile U2U Member Reply With Quote
can't see how a modified cam cover cud stop the oul surgin on hard corners. I've never had a problem, and that's wot the baffle plate is for in the sump.
Mieran
Member
Registered: 28th Jan 08
Location: Newcastle upon Tyne
User status: Offline
10th Aug 11 at 23:09   View User's Profile U2U Member Reply With Quote
Its got nothing to do with oil surge, when you go round a corner oil gets trapped between the plate and cam cover then makes its way to the throttle body through the breather pipe which then burns and comes out as smoke

Its a different story on a LET because that breather pipe routes to the turbo intake so you usually have a turbo intake full of oil
Crana
Member
Registered: 20th Jan 09
Location: Newcastle
User status: Offline
11th Aug 11 at 01:26   View User's Profile U2U Member Reply With Quote
kid knows his stuff bout redtops haw
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
11th Aug 11 at 11:07   View User's Profile U2U Member Reply With Quote
This was a well known fault at Vauxhall, and although they never fixed it on the c20xe, they made the same design fault with the later ecotec cam cover, when pulling up to a stop even with the clutch in, because of the build up in crank case pressure, the engine used to kangaroo and stall, a recall was done at the fitted a box to the crank breather like so.



So it is a worth while mod on a 20xe because it also helps the crank vent system circulate freer and theres no where for the oil to get trapped behind and go back into the tb like Mieran said too.
SEAN_P_
Member
Registered: 30th Nov 09
Location: *Washington*North-East*
User status: Offline
11th Aug 11 at 12:06   View User's Profile U2U Member Reply With Quote
Av done the breather mod on mine smoothed over the skinny pipe put the big pipe into a catch tank and blanked the ports up on the throttle body
SEAN_P_
Member
Registered: 30th Nov 09
Location: *Washington*North-East*
User status: Offline
11th Aug 11 at 12:09   View User's Profile U2U Member Reply With Quote
Gave me extra 30 bhp
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
11th Aug 11 at 17:28   View User's Profile U2U Member Reply With Quote
now all you need is a dry sump...
john_redtop
Member
Registered: 31st Dec 08
Location: acklam middlesbrough
User status: Offline
11th Aug 11 at 18:11   View User's Profile U2U Member Reply With Quote
I'll do it like you say it costs nothing and gives me something to do at the weekend
SEAN_P_
Member
Registered: 30th Nov 09
Location: *Washington*North-East*
User status: Offline
11th Aug 11 at 18:34   View User's Profile U2U Member Reply With Quote
i 100% recommend it like stops oil going into the inlet
john_redtop
Member
Registered: 31st Dec 08
Location: acklam middlesbrough
User status: Offline
11th Aug 11 at 20:33   View User's Profile U2U Member Reply With Quote
Yeah I'll do it cheers for the info boys

 
New Topic
New Poll

Corsa Sport » Message Board » Regional Groups & Events » North East » c20xe/let breather mod 24 database queries in 0.0197120 seconds