Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
DMR Transition jump/dirt bike (24")
I have owned this around 6months, not long after I bout it I fully stripped it, had the frame, forks, bars, stem, seat post and clamp, crank and chain ring acid dipped and sand blasted.
Ground the brake mounts off the forks (left the disc mount on) and brake cable mounts off the frame for that smooth/clean look.
The frame, forks and bars have been done I'm gloss red, the stem polished and crank, chain ring and seat post in gloss black, finish is to a very high standard.
It has had a service by a friend who owns his own bike shop, rear wheel run true, new brake cable on rear (no front brake) etc
Ideally it needs a new saddle and grips to make perfect as it looks like a new bike as it's not been rode since all the work has been done
....................................................................
Below is the spec of the bike (copied and paste)
Built around the same frame that the DMR Jump Bike team choose to ride, the Transition is designed and built with dirt, street and park in mind. Aimed at the more aggressive rider the Transition frame is built with oversize heat-treated 4130 Cro Mo tubing throughout and finished in battleship grey for that authentic no-nonsense look. Checkout the full spec and it’s obvious that no compromise has been made with the DMR Transition.
Frame: DMR Transition 300mm Integrated Headset Euro Bb
Fork: DMR Trailblade2, 14mm Dropout, Canti/Pivot, Plus Disc Mount
Frame Colour: powder coated gloss red
Rear Brake: Tektro V Brake Bx25
Front Brake: Tektro V Brake Bx25
Brakelevers: Tektro Bx-2
Grips: DMR Zipgrips Dual Density
Handlebar: DMR Cro-Mo Wingbar
Stem: Cold Forged 50mm Bmx Type
Handlebar: DMR Cro-Mo Wingbar
Headset: Fsa Orbit C, Integrated 45/45 Degree
Bottom Bracket: Euro Bb 4 Bearing Sealed
Crankset: 2pc Cro-Moly
Chain: Reluctant Heavy Duty Half Link
Chain Tensioner: Alloy 14mm Chaintug
Freewheel: Shimano 16t
Rear Hub: 14mm Single Speed Nutted Axle 48h
Front Hub: 14mm Nutted Axle 36h
Spokes: Stainless Steel W/Brass Nipples
Rim: DMR 24”Dv Rims, 36h Front, 48h Rear Eyeletted
Spokes: Stainless Steel W/Brass Nipples
Tyre: DMR Moto 24”
Pedal: DMR V8 (polished)
Saddle: DMR Dirt Jump Saddle
Seat Clamp: Single (powder coated black)
Pictures:
The strip down
After being acid dipped
Powder coated and Built back up
Price is £225ono and collection from Stourbridge (west midlands)
Few people on here can vouch I'm a genuine person/seller
[Edited on 23-02-2013 by Minty_Fresh]
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Bump
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Bump
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Bump
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Bump
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Bump, offers?
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Any offers?
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
Bttt
|