cleggy2020
Member
Registered: 13th Mar 11
Location: halifax
User status: Offline
|
Purchased a new door from a breakers, any guidance in swapping it over would be useful, I need to change the glass, regulator, mirror and door lock, also the new door has had the loom cut so where do I unplug it on the existing door ?
Thanks in advance
|
corsa-torque
Member
Registered: 15th Mar 11
User status: Offline
|
First knock the check strap pin out then using a punch hammer the door pins out. That should see the door off the car.
The loom to the door is simply twist the plug and it will separate.
Mirror is 3 bolts to remove, pretty obv's where they are.
Window you will have to remove door card, then you will see window mech, undo the runner the side nearest the lock and the window should be gently pulled from the door
Once window has been removed you will have access to lock etc. prob easier to remove the whole handle so undo every bolt around then and that should be everything your after.
Re-fit everything in the reverse order
|
cleggy2020
Member
Registered: 13th Mar 11
Location: halifax
User status: Offline
|
Did it to today mate ! Very helpful reply thankyou
|
corsa-torque
Member
Registered: 15th Mar 11
User status: Offline
|
No problemó
|