Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
Just been looking at my power graph from after my re-map. The torque is pretty impressive especially considering the air-mass meter is fooked! When that's replaced the power should go right up.
The torque shoots up just before 2,000rpm and stays strong till 6,000rpm, cant moan at that!
Here's the RPM v Torque figures;
2000rpm - 190lb/ft
3000rpm - 245lb/ft
4000rpm - 230lb/ft
5000rpm - 228lb/ft
6000rpm - 205lb/ft
Can't wait to get it back on the rollers after the air mass meter is replaced, also can't wait to get it up the strip next sunday, hoping for a low 14 this time. 
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
Power is not so good, but that is mainly hit by the air-mass meter tricking the ecu for not knowing the correct air/fuel mix. Car is running very lean at the moment.
RPM v BHP figures;
2000rpm - 70bhp
3000rpm - 140bhp
4000rpm - 180bhp
5000rpm - 218bhp
6000rpm - 210bhp
Not bad, much better than it was standard but again, this should shoot up when the air-mass meter is replaced.
|
Marc
Member
Registered: 11th Aug 02
Location: York
User status: Offline
|
279bhp
242lb/ft torque
@ 6250rpm
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
Mine will be a whole lot nearer to that (but with a shit load more torque) when I get my custom fmic made up.
|
vibrio
Banned
Registered: 28th Feb 01
Location: POAH
User status: Offline
|
why did they map it when the AFM is fucked :boogle:
|
Matt H
Member
Registered: 11th Sep 01
Location: South Yorkshire
User status: Offline
|
my torque figure was 287 lb/ft last time i went on the rollers  
|
Tom
Member
Registered: 3rd Apr 02
Location: Wirral, Merseyside
User status: Offline
|
But pat it's 2wd
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Im fairly sure you wont quite be getting that kind of power but then i dont know your engine spec at the moment.
I thought with the new engines that the turbo can't hold the higher boost and anything over 250-260bhp odd needs the larger hybrid turbo?
[Edited on 14-05-2004 by Daimo B]
|
vibrio
Banned
Registered: 28th Feb 01
Location: POAH
User status: Offline
|
out of interest whats your boost plot like?
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
When my air-mass sensor is fitted and everything's running okay again I am confident the car will be making approx 240bhp and 260lb/ft.
AmD are good at what they do and have a number of cars running standard turbo that have power in excess of 260bhp and 290lb/ft. With a hybrid and decent intercooler they are confident they can get over 300bhp from these engines, they are currently working on this phase.
Vibrio, they mapped it whilst the meter was fooked because I had already been their once and they turned me away because of the meter being busted, so I went to Vauxhall to get it fixed, but somehow they failed to replace it. They mapped it anyway explaining that power would be low and recommended that I didn't drive very hard on the way home and not at all after then until I got the meter replaced so not to melt any valves or pistons.
|
grigglet33
Member
Registered: 23rd Mar 01
Location: East Sussex
User status: Offline
|
My mates coupe turbo has a phase 3 regal kit on it, he does not get more than 270bhp need a hybrid turbo for any more as daimo says!
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
quote:
Originally posted by vibrio
out of interest whats your boost plot like?
I don't know, only got a bhp and lb/ft graph. 
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Whats your current engine spec?
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
K&N panel filter
De-restricted airbox
Iridium cool running plugs
Cool thermostat
Stainless boost pipe
Custom 2.5" bore exhaust system
AmD stage one custom re-map
|
vibrio
Banned
Registered: 28th Feb 01
Location: POAH
User status: Offline
|
monkey's why map a car if there is a fault with the air sening equiment. if it is mapped with a doggy Air mass meter then when you fit a new one and get correct settings for air mass it's going to be all over the place.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
Ross, do you remember folks faces when the supra was on the rollers...... 440 lb/ft
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
pat, your spec is gay.... sort it out
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
quote:
Originally posted by Patrick
K&N panel filter
De-restricted airbox
Iridium cool running plugs
Cool thermostat
Stainless boost pipe
Custom 2.5" bore exhaust system
AmD stage one custom re-map
Im sorry but i really can't see those mods giving you another 60bhp.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
boost increase ........
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
Like I've said Daimo. They have mapped loads of z20lets now. They have all gained around 240bhp on standard engines and a few have also been confirmed on other rolling roads too.
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
But i didn't think the standard turbo could take that much more boost?
|
Patrick
Member
Registered: 25th Apr 02
Location: SE London
User status: Offline
|
Yawn..
|
nik
Member
Registered: 19th Jun 00
User status: Offline
|
Need to get mine rolling roaded soon 
|
vibrio
Banned
Registered: 28th Feb 01
Location: POAH
User status: Offline
|
quote:
Originally posted by Daimo B
But i didn't think the standard turbo could take that much more boost?
regals phase software gives 247hp approx with larger intercooler. with a custom map your going to get more so 260 would be possible however with error that could be anything from 250-270 hp
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
quote:
Originally posted by Patrick
Yawn..
Im asking a geniune question you plum!!!!!!!!!!!!!!!!
|
