Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
Tried to fit my new screen/head unit tongiht, sorted all wiring out lengths removed side trim panels to hide wiring it all fitted, came to the simplest part removing my old head unit, lost the keys  I had them on tuesday spent 1 hour looking for them and cannot find em anywhere 
How lame
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
use spoons!
what unit is it?
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
deh 6300r
Spoons u say? I tried coat hangers and various other implements i actually have 2 sets of these kesy but cannot find any
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
aye, spoons.
Better and easier than spoons, hacksaw blades, and chop the end off(the bit with the pin in) then slide them down the sides. Then put your hand behind the unit and push it out,this is quite easy to do from the back left of the unit, as you look at it from infront, not quite as much room on the right hand side.
OR you could get your ass up the pod tomorrow and have someone do it for you, with the proper tools and everything!  and i dont even have a pioneer unit 
|
Paul_J
Member
Registered: 6th Jun 02
Location: London
User status: Offline
|
Think I have those sorta things... they're L shaped yeh?
mines a pioneer 6400 R ... ____| < that shaped thing. I've got a couple I could probably let you borrow.
I bloody fitted my pioneer to my 106 gti today! after loads of hassel!!! - i.e. ariel kept coming out and the wires were all in the way, bitch to get old stuff out etc etc...
and it won't save my memory.
Bloody remembered I swapped the yellow + red wire over, as for corsa its different - doh. Gotta take it out tommorrow and swap em back over again.
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
106 are an ass. They have those poxy slide-clips either side, some have normal pins tho. but those others are a bitch!
|
Paul_J
Member
Registered: 6th Jun 02
Location: London
User status: Offline
|
The ariel cable is also stupidly short! Why they didn't make it just an inch longer I don't know? but it means you put the ariel in the back... then go to tuck all the wires in and slide it back and it pops out
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
tape it into place once you've plugged it in 
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
Paul i think you should lend me them
I have a horrible feeling i threwe them out Such a muppet i am
Really wanted to get it all done tongith and now im not going to
Can you buy em from places like halfords etc?
|
Paul_J
Member
Registered: 6th Jun 02
Location: London
User status: Offline
|
yeh I believe halfords may do them?
To get standard one out you need round things - so coat hanger works ok... but to get the pioneer out its those flat |______ shaped things
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
yup. Seriously though, all you need is some slim metal, I can get some units out with my car key, just the one. Do one side at a time, have used cable ties before now too. Alls it does is releases a catch on the side of the unit/cage. The advantage of using pioneer ones is that then u just pull the keys out and the unit comes with it, but just as easy to slide it out as i explained up there somewhere^^^^^
You not got a hacksaw/junior hacksaw? knife'll do it, like i say, just summit to slide down the side and release the clip.
|
Paul_J
Member
Registered: 6th Jun 02
Location: London
User status: Offline
|
yeh as corb says - should do it. get two bits of thin metal or lolly pop sticks - slide em down each side... then pull at the front (or push from behind if you've removed ash tray)
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
apparently halfords sell em, so ill go and get em before i damage sommit
Im quite good at that
Got all excited about watching dvds in me car and now i have to put up with wanko pioneer rattling headunit for a few more days
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
woman
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
Git
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
So, lets get this straight. You're too big a girl to bring your car to the pod tomorrow, AND you're too big a girl to change your headunit You've made me laff so much, ive just wet myself
[Edited on 23-01-2005 by corb]
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
Corb Damn you i CANT bring the car to the pod cos im not a feckin fool and dont want to blow it up
But all headunit comments are valid
But then you now stink of piss so i get the last laugh
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
ya momma.
|
Paul_J
Member
Registered: 6th Jun 02
Location: London
User status: Offline
|
It does amuse me that most people (obv not you corb) that get a 2.0 16v turbo corsa don't take it down the strip.
Snowy hasn't taken his down and he's supposed to be running 280ish bhp - I took a 1.2 16v down there lol - I think snowy is a big girlie.
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
Paul, you can take mine down the strip 
So long as you pay for a new clutch, a silicone hose a new exhaust and what ever else goes bag 
|
Paul_J
Member
Registered: 6th Jun 02
Location: London
User status: Offline
|
Deal I can drive it though yeh?
That only covers things that go 'bag' though yeh? - things that go Bang are all gonna be paid for by you mate
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
bag is a term for ANYTHING going wrong
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
you still not done the exhaust yet?  suppose i'll let you off then, get it sorted the clutch will be fine tho, and what silicone hose is this?
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
exhaust is tuesday corb and some of us have work to do
Silicone hose will be a replacement for the one i hve poppiun off
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Online
|
i go to work dont do owt though!
I think i should really go to bed. Gotta be up at 6, stripping the corsa ready for a day at the pod!
|
