Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Ok heres the story so far:
I bought a Mk2 Golf GTi 1) Because id always wanted one. 2) Cheap for me & Jade to both drive & insure. 3) Because this one was going for a song as it has engine problems & had given up wanting to start.
I spent the next couple weeks removing all the ignition parts & renewing various parts until she started, very lumpy - juddering with strong pertol smell from the rear end!! Further investigation found that cylinders 3 & 4 are not giving the correct compression.
I then got offered a 2nd 8v GTi, this one was running but has a cooked clutch & some accident damage - picked it up & handed over £50 notes.
Father wouldnt let me keep 'another car' at his house so I took it round mine & in true adam D style started stripping bits off....neighbours must love me 
So ive got 2 golfs to make one good one from!! Ive already stripped & sold what I can from the second one (Interior, Exhaust, couple panels, loom etc so thats paid for itself & then some!!) & im about to begin the task of stripping down BOTH engines to see whats what....im hoping I can use the head off the 2nd one onto the bottom end of the 1st one & not have to swap the whole thing!!
Heres how it looks today before I got rained off:
Started stripping a few bits out-
Dunno if this would make any difference at all but No4 camshaft bearing cap (sits between cyl-3&4) is well...its not there, its been butchered off & bodged!! Could this perhaps do anything to weaken it???
The white beast
Hopefully something to salvage from here 
Hopefully have more updates soon pending on the weather
I would also like to highlight how good it is to have a good spacious tidy garage to carry the work out it -
Next on the agenda is to remove both heads, pick the best one to work with, maybe send it off to be skimmed, reccon the injectors, paint camshaft cover, get a gasket set & some oil & filters from VW, erm scrap the white beast before I get an asbo & start the rebuild 
Any comments?? 
To be continued...
[Edited on 30-01-2007 by Colin]
[Edited on 29-04-2007 by Colin]
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
why buy the white one? why not just fix head on the other
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
quote:
Originally posted by City
why buy the white one? why not just fix head on the other
Quite simple really, the head was only reconditioned on the black one 10k miles ago....& thats it fucked again!! I know the white one is good, runs well & is strong & i can remove it & change it over without the need to for skimming, it only cost my £50 & theres many times that in parts to sell which ive been doing & i'll still have plenty spare bits to keep for myself.
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Other plans to be completed in time :
Tidy up surface rust in engine bay - mainly on battery tray.
Fit new badging all round
Fit new Hella smoked fog lamps
Decide whether to get single lamp conversion or keep the current set up.
And pending funding :
Full system stainless Milltek Exhaust inc 4-1 manifold.
BBS LM rims
[Edited on 15-12-2006 by Colin]
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
did it have no compression on 3+4?
maybe all it needs is a camshaft bearing cap
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
any luck with the badge colin
|
mav
Member
Registered: 19th Jun 01
Location: Scotland
User status: Offline
|
Nice project Colin...
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
quote:
Originally posted by Robin
did it have no compression on 3+4?
maybe all it needs is a camshaft bearing cap
Very little, 1psi from 12 it should have
I dont have a clue really...im a total amature, having fun though Camshaft bearing cap 4 has sheared right off so I 'think' im going to work off the other head.
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
quote:
Originally posted by jr
any luck with the badge colin
I aquired one on ebay yesterday for £2
Phoned one of the numbers you gave me & reply was VW dont make them any more & dont know where you'll get one mate
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
quote:
Originally posted by mav
Nice project Colin...
Not as hardcore as some the projects on here but at least im getting involved
|
Marc
Member
Registered: 11th Aug 02
Location: York
User status: Offline
|
Nice one Koling! Don't scrap the white one, sell it on eBay, least that way it has a chance of being resurrected!
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Thanks marc 
Nah its not worth resurrecting, its all mashed in on drivers side rear & most of its missing inc sunroof interior & bonnet, running gear....cant see anyone bidding on an old rusty bent shell
[Edited on 15-12-2006 by Colin]
|
Marc
Member
Registered: 11th Aug 02
Location: York
User status: Offline
|
Ah right! I hate seeing cars scrapped!
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Your more than welcome to it if you feel so strongly
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
quote:
Originally posted by Colin
quote:
Originally posted by jr
any luck with the badge colin
I aquired one on ebay yesterday for £2
Phoned one of the numbers you gave me & reply was VW dont make them any more & dont know where you'll get one mate
there cunts, if they had checked it would have been obvious what to do
at least you got one
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Well the one I got isnt brand new but its still better than the plain golf one currently on the car. I'll see what its like when it arrives!!
|
AdZ9
Member
Registered: 14th Apr 06
User status: Offline
|
how much did the black one cost mate? if you don't mind me asking
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Black one was £400 & white one was £50.
£450 for both but ive sold £110 worth of bits from the white one so £340 it owes me
Ive bought a few other parts too new battery, leads & plugs etc too but hope to have it running for less than 500
Been told I could get £50 for power steering parts & £20 for gearbox so might remove them too
|
Kano
Member
Registered: 29th Aug 04
Location: Fife
User status: Offline
|
Colin they dont have a bearing cap there on the 8v's.. Every VW 8 valve engine I've had has been EXACTLY the same as yours..
I'll whip my rocker cover off the MK3 and take a pic if you want proof.. lol
First time I saw that I shat myself, still dont understand it.. lol
[Edited on 16-12-2006 by Kano]
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
Yeah its been pointed out on a golf site lol
Apparently hydraulic heads only have 4 caps, its meant to be like that & theres an oil spray between 3&4 whereas the others are solid metal tappets & cars with shim bucket tappets have all 5.
[Edited on 16-12-2006 by Colin]
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
quote:
2) Cheap for me & Jade to both drive & insure.
I was always told they were expensive to insure. Thats nice to hear.
Have you done any car work before this ? If not well done at attempting it. I'm sure you will learn alot. I would like to do something like this at somepoint  Even though i wouldn't know where to start.
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
quote:
Originally posted by Wonderboy
I was always told they were expensive to insure. Thats nice to hear.
Have you done any car work before this ? If not well done at attempting it. I'm sure you will learn alot. I would like to do something like this at somepoint Even though i wouldn't know where to start.
Its about 400 for both of us (shes on provisional) or 200odd just myself.
Ive done lots of small bits, changed exhausts, springs, radiator, brakes, done plugs & oil service, small body repairs...never dived into the insides of an engine though, but im wanting to learn. Im just being let down by lack of time, lack of a good workshop/tools & the weather what with working on the drive!!
|
Wonderboy
Member
Registered: 30th Dec 06
Location: Ayrshire, Scotland
User status: Offline
|
How many no claims do you have ?
Yea i know what you mean. It's not the right time of year for this sort of thing. Gets dark too early and pisses down with rain 24/7
That quite a bit of work you have done I would like to be "mechanicaly" minded. Maybe at some point i will do one of those college courses once i have finished the course i am currently doing
Good luck with the project and keep us updated if you get much done!
[Edited on 14-01-2007 by Wonderboy]
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
5yrs NCB
Im not even scratching the surface tbh, im not 100% sure what is wrong with the troubled lump & ive at best got a head refurb & new clutch/cam belt to fit with no previous knowledge on any of it. You dont need to go on a course to do any of this, just get fired in, take your time, buy a haynes manual & make sure its ok for your car to be in bits without it putting you up shit creek!!
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
I'll update as & when, im hoping to have it on the road next month - ive got a week off at the end of Jan so hopefully get lots done then!!
|
