Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
As above, i want to get my x16xe to about 140bhp, it has about 110 at the mo with a cat back system and panel filter..
Im thinking of camming it and fitting a performance manifold and also a map/chip..
Just wondering if anybody can tell me if they have done anything similar and what the gains are?
Also, the best products or best priced products to use
Thanks,
Brian
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
Doubt it will be 110bhp.
Mantzel Inlet
Fast Road Cams
421 Manifold
Then a remap
|
Damian_666
Member
Registered: 28th Sep 06
Location: essex: Drives: Mitsubishi Evo 2 RS
User status: Offline
|
sell it and buy something more tuner-able or a redtop lump
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
theres something about redtop motors.. i think there a very poor engine
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
quote: Originally posted by Jamie_Hastings1
Doubt it will be 110bhp.
Mantzel Inlet
Fast Road Cams
421 Manifold
Then a remap
What sort of gain?
ha jamie i know u... u bought that goldy yellow corsa off me
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
Maybe 130ish after all of that. Yeah i would just put a xe in it or bodie the 1600. Aye a did buy the corsa from you. 140 miles to £10 haha
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
tidy little car that.. did u valver it? Or has it stil got the 12v in it ha.. the thing is.. id b happy with 130.. but whats the cheapest easiest way to get it to that?
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
No just sold it but its been sold again i think,didnt valver it just bought a 106 Gti instead. Baz just go for a redtop,cheaper and less hassle. Would be around £150 for the inlet well a copy one. £200 for a manifold £300 for cams and a remap would be around £300 roughly
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
how much u get for that then?
Yer but redtops are crap engines.. theres something about them i dont like.. probs wud only cost a few hundred quid for a redtop motor like but still
|
DizzyRebel
Member
Registered: 2nd Jan 09
Location: Lincoln
User status: Offline
|
Nitrous, extra 25-100bhp at the flick of a switch
|
Mertin
Member
Registered: 12th Oct 05
Location: Scotland
User status: Offline
|
If redtops are crap engines why they so popular? whats crap about them?
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
quote: Originally posted by Bigbaz89
theres something about redtop motors.. i think there a very poor engine
quote: Originally posted by Bigbaz89
Yer but redtops are crap engines.. theres something about them i dont like..
That is THE most ludicrous pair of statements I have ever heard on here.
The 20xe engine is one of the most iconic engines of the motorsport world.
Take this quote from SB developments
quote: What makes the C20XE engine so good?
Over to you Steve. "It's one of the last production engines with a massive in-built tolerance for being tuned up. Most of the components are good for 250bhp. The rods can cope with that - the only reason we advise against it is that if the engine is over-revved it can cause problems. Even the pistons are fantastic. The original piston is a forged item - it's beautiful."
The entire bottom end of the C20XE is very strong, especially the crankshaft. "It's bomb proof," says Steve. "I've never seen one break. Even with an engine has run out of oil and the con-rod has disappeared out ot the side of the block the crank is still in one piece!" Such strrength would be useless if the C20XE couldn't produce the power and torque to exploit it, but the cylinder head is something of a mass-produced masterpiece, being designed by Cosworth engineering for GM/Opel's requirements. Packing decent-sized valves and ports and a highly efficient combustion chamber shape, the alloy 16-valve head will flow enough air to reach 230bhp before modifications are required.
What exactly is "the something you don't like"?
Crazy talk
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
^ And that is before I get into your 'there' and 'they're' misuse.
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
because there weak and break all the time..
thats wot i dont like
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
They, there, their.. however i spell.. they're stil fuckin junk
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
^ That is bollocks
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Mertin
Member
Registered: 12th Oct 05
Location: Scotland
User status: Offline
|
quote: Originally posted by Bigbaz89
because there weak and break all the time..
thats wot i dont like
Your saying their weak... did you even read what was taken from the SBD website?
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
Also, from someone who used to own a Rover
You are talking crap.
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
do u ever believe what you read in the papers?
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
Baz, word of advice, don't dig yourself any deeper. They are a fantastic, strong engine.
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
Oh dear, theres a scouser communicating with me
|
Mertin
Member
Registered: 12th Oct 05
Location: Scotland
User status: Offline
|
I wouldnt class what the press say and what a SBD say as the same thing
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
I dunno, it wud be just my look to buy a dog rough 1 and have nowt but trouble with it
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
'There's' actually. At least I can communicate you idiot.
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Bigbaz89
Member
Registered: 8th Mar 09
Location: Hartlepool, Cleveland
User status: Offline
|
quote: Originally posted by Ste W
'There's' actually. At least I can communicate you idiot.
Call me an idiot to my face..
Idiot
|