Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
yeah, soldered to the blue wire at the 9 pin plug, one in the middle, bottom row of plug. even if the stat is stuck open the temp sensor would work right? and the multi meter showed the little sensor to be working
|
Darryl H
Organiser: South Central Premium Member
Registered: 19th Nov 09
Location: Camberley Drives: Porsche 944
User status: Offline
|
Yeah but it would always be cooler, leave it til the fan kicks in if it gets there then you know it's not working as they kick in at 95 or so from memory
|My Corsa|SC|My Instagram|
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
haha i thought about doing that but then thought if the fan doesnt kick in and it blows the head gasket i'd be gutted!!
anyway got the gauge to work!! stripped the loom of the old 1.2 loom for the blue wire and used the sensor off the old engine as it was working perfectly before removal. that combined it works ordered a new cts from vauxhall today, pick it up tomorrow. hopefully that'll cure the bad fueling problem
|
Darryl H
Organiser: South Central Premium Member
Registered: 19th Nov 09
Location: Camberley Drives: Porsche 944
User status: Offline
|
Ah good times mate! Do you run a lambda? Mine was overfuelling loads because I didn't have a lambda so i had to earth pin 20 so it didn't think it was running off the lambda however it did have EML before I did that
|My Corsa|SC|My Instagram|
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
that's anothing thing that annoying me! the eml light never comes on at all. i mean when turning ignition on. there are wires from the ecu that are cut and also wires from the 9 pin plug that are cut but i wasnt sure if i should solder them together so haven't yet. i am running a lambda sensor but might get rid if it'll run better without and earth the pin 20 :/ what you think?
|
Darryl H
Organiser: South Central Premium Member
Registered: 19th Nov 09
Location: Camberley Drives: Porsche 944
User status: Offline
|
I'm not sure mate, mine does run a little rich but have been told my afm is going so I wouldn't know until I've changed that
|My Corsa|SC|My Instagram|
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
ok, i'll keep an eye on your thread then!
|
DansCorsaSXi
Organiser: Yorkshire Premium Member
Registered: 13th Jan 10
Location: Worksop
User status: Offline
|
Adam,quick question?
How come there's no pics of the finished engine and a video of it running? Please can we sort this out.
Star silver C20XE SXi Project thread
Smoke Grey Corsa GSi Project thread
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
quote: Originally posted by DansCorsaSXi
Adam,quick question?
How come there's no pics of the finished engine and a video of it running? Please can we sort this out.
i keep meaning to! was gonna do videos on Saturday but the fan belt snapped! Dont wanna do it with the iphone as the camera is basically shit haha and i've been busy at work or busy fixing all the little niggles.. should get some pics this weekend in the daylight for you!!
|
DansCorsaSXi
Organiser: Yorkshire Premium Member
Registered: 13th Jan 10
Location: Worksop
User status: Offline
|
Nice one mate,can't remember what the engine looks like.
Star silver C20XE SXi Project thread
Smoke Grey Corsa GSi Project thread
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
hahaha same as yours but grey rocker cover
|
Ben-B
Member
Registered: 28th Jul 08
Location: the lovely Nottingham
User status: Offline
|
Been out in this, Rapid as fook.
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Cheers brando!
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
finally took some pictures last night
new tow strap on show, new indicators.... orange bulbed fog lights bolted on behind the grill instead of shitty side repeater in the bumper! still have crappy looking holes in the bumper now though
close up also shows engine sitting nice and level
also a bit less front camber due to new adjustable top mounts
ended up chopping the bulkhead like sweeney todd to fit the powercap because the ecotec pipe i ordered from redtom didnt show up in time. the fuel guzzling air filter stayed because i couldn't get the pipe work to fit between the powercap/MAF/standard airbox :/
this is staying on the top corner of the windscreen though
i keep getting worried about the engine temp, even after a half hour drive of mixed driving ended with the temp gauge like this
even idling for about 20 mins at the garage for an emissions test tonight it didn't go much higher at all would that mean it has a cool running stat? and the fan didnt kick in at all either, the heaters have been on full hot since back on the road but today the fan was on speed on 1 all the time i think
comments welcome
[Edited on 26-01-2012 by Edges 58]
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
oh and the plug cover isnt on because i dont have the bolts for it.
|
AshWatson
Member
Registered: 18th Jun 10
Location: West Yorkshire
User status: Offline
|
looks ace mate even though i dont have a B at the moment i miss those morettes the orange bulb'd fog lights the 1's i gave you ?
[Edited on 26-01-2012 by AshWatson]
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
quote: Originally posted by AshWatson
looks ace mate even though i dont have a B at the moment i miss those morettes the orange bulb'd fog lights the 1's i gave you ?
[Edited on 26-01-2012 by AshWatson]
cheers ash!! yeah they are mate haha, only took me a year an half ish to get fit them lol the morettes look good though!!
|
mike56gte
Member
Registered: 23rd Jun 09
Location: Fife, scotland Drives: Audi S3
User status: Offline
|
thats where the temp sat at on mine when i had it. thought it was a seized thermostat so put a new one in and it still sat like that but never caused any bother so i ran it like that the hole time. as for the whine in 5 gear i honestly never noticed. lol
hope your happy with the way it preforms. its a really strong engine, pulls really well.
p.s sorry bout the spark plug cover bolts there in the door pocket of my car
|
DansCorsaSXi
Organiser: Yorkshire Premium Member
Registered: 13th Jan 10
Location: Worksop
User status: Offline
|
Nice one Ad'! Looks awesome!
Seeing these photos now makes me want to get mine in sharpish.
Great work though mate,alot of credit to you for doing the conversion etc. Must be well chuffed with it all!
Star silver C20XE SXi Project thread
Smoke Grey Corsa GSi Project thread
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
cheers lads!! it pulls like a rocket most the time (for people saying they arent that quick, i'm talking from being a 1.2 previously) but half the time its juddering and hesitant. the emissions test today showed it was running very lean. HC i think it was should be 1.5% or something and it was ranging from .3 - .6 :/
i'll sort some bolts mike, its fine!
sort your life out dan and get it in and running!! i'm well happy bar the minor running issues
|
DansCorsaSXi
Organiser: Yorkshire Premium Member
Registered: 13th Jan 10
Location: Worksop
User status: Offline
|
I'm trying
Not be long now dude,i just want it in bay.
Star silver C20XE SXi Project thread
Smoke Grey Corsa GSi Project thread
|
Ben-B
Member
Registered: 28th Jul 08
Location: the lovely Nottingham
User status: Offline
|
Forgot to say, took these yesterday:
Shoulda told me i would of took a vid
[Edited on 27-01-2012 by Br.ANDO]
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Cheers ben! I forgot to think about videos haha
|
Ben-B
Member
Registered: 28th Jul 08
Location: the lovely Nottingham
User status: Offline
|
too busy chasing glanza's thats why haha
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
I'm sure I was in front of that glanza, so he was chasing me
|