MarkSport
Member
Registered: 22nd May 09
User status: Offline
|
I once done a mistake at work.was working at a computer harddrive testing company.my company was being dodgy as fook selling them on as un-tested meaning i had to wipe the marker pen off them so they looked utested.i forgot about 5 harddrives in an order of like 300 hard drives which made them complain and lose their business causing about 4k loass
|
Ben G
Member
Registered: 12th Jan 07
Location: Essex
User status: Offline
|
i put 60 flywheels on the wrong engines before.
was quite a costly mistake as someone had to get paid to take the clutch and flywheels off again and put the correct ones on.
took forever aswell.
wasn't my fault though. our suppliers put the wrong ones in the boxes. i just pick them from a light. they look the same, just different thickness.
|
lostboy
Banned
Registered: 29th Jan 09
Location: Durham
User status: Offline
|
quote: Originally posted by K3 VMU
quote: Originally posted by am4nf
quote: Originally posted by LiVe LeE
my biggest one was this...... and by big I mean less than 10cm big, it should have hung nose up but for about 3" it hung nose down - cost us around £10k to sort out
Weirdly, I never got bollocked
Im confused
well look how level it is picked up, the nose is pointing down, and it should have been pointing up
What difference does it make, explain it so those of us who are a bit on the slow side can understand.
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
quote: Originally posted by willay
quote: Originally posted by jr
oh i once got driven into in an S6 whilst lining up to try and brake an indoor 0-60 record
ffs
wish i was joking to
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
quote: Originally posted by BarnshaW
when i was 15 i had a job at a pet shop, first day there i was cleaning the avary and had a bucket of hot water and bleach , i was cleaning it out and 2 budgies flew into the bucket and died.
they still kept me employed but about 3 months later in the same avary i was cleaning it out and forgot about a quail that was living in there and stood on it and killed it. I didnt have a job after that
Is that where your love of badgers stems from?
[Edited on 18-01-2010 by mwg]
|
C2RL R
Member
Registered: 28th Mar 02
Location: Redcliffe, QLD
User status: Offline
|
what did you get wrong then Lee? was the lifting point just in the wrong place or was the balance totally out?
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
Only thing I done wrong at europcar was fill a petrol zafira up with diesel, cost me £50 but probably cost the company about £200
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
quote: Originally posted by C2RL R
what did you get wrong then Lee? was the lifting point just in the wrong place or was the balance totally out?
Lifting point was about 80mm further back than it was meant to be so the Centre of Gravity was in front of the Centre of Lift meaning it lifted nose down - the boat is lifted from a ship into the sea so everytime it was launched you would have risked tipping over if a wave washed into the bow at the wrong time.
All daughter craft should be launched 2-5degrees nose up; this was 13degrees nose down
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
just to add, there were two of these boats, delivered at the same time so even bigger bill
|
Cosmo
Member
Registered: 29th Mar 01
Location: Im the real one!
User status: Offline
|
Just make the fatty sit at the back.
|
Matt L
Member
Registered: 17th Apr 06
User status: Offline
|
did 1 months worth of wages wrong for a company but didnt realise till 8 months later so had to re run them all cost the company about £700 in tax.
|
pow
Premium Member
Registered: 11th Sep 06
Location: Hazlemere, Buckinghamshire
User status: Offline
|
Ripped a good few meters of guttering off with a cherry picker here at my current place!
|
Liam
Member
Registered: 19th Jan 06
Location: Stafford
User status: Offline
|
Set a sprinkler off at work, cost's Argos circa 10-15k everytime it goes off, with lost sales etc as there is a call centre above the warehouse..
|
oceansoul
Member
Registered: 19th Jun 06
Location: Sunbury, Surrey
User status: Offline
|
quote: Originally posted by C2RL R
yeah i've done a few. i once drilled into a trunking with a 25mm hole saw and forgot to stick my little block of wood in there to protect the cables. i obviously cut into a few of them and basically shut down an entire production department because the wires i cut were for the lighting. they lost about 6 hours production in there so that must work out to a few grand.
i've fucked up a few machines when i first started learning plc systems. it's so easy to cause a catastrophe by putting an n/c contact where an n/o should be.
What PLC systems you work on?
Worst ive done, is replacing a power supply for a Control Front End (BBL3330 if anyones intrested), took the wires out, hadnt isolated it (oops), shorted to case and tripped the whole panel out. Panel was in the control room. We lost our SCADA system for the whole area =[ Was back up and running a few mins later, but its neveracking when 15 year odd equipment restarts, never know if it will come up or not
|
Seany
Member
Registered: 13th Dec 06
Location: Dunfermline, Fife : Drives Astra cdti Sri
User status: Offline
|
quote: Originally posted by Matt L
did 1 months worth of wages wrong for a company but didnt realise till 8 months later so had to re run them all cost the company about £700 in tax.
happened at my old job, the whole company got over paid. ended up with an extra 400 in my wage packet for the week, they had to take it back at £20 a week because the union stepped in.
|
C2RL R
Member
Registered: 28th Mar 02
Location: Redcliffe, QLD
User status: Offline
|
quote: Originally posted by oceansoul
What PLC systems you work on?
modicon, omron, siemens and a bit of allen bradley
|
CorsAsh
Member
Registered: 19th Apr 02
Location: Munich
User status: Offline
|
Not made any serious fuck ups, usually just some issue with rapid prototyping that needs fixing.
|
Eck
Premium Member
Registered: 17th Apr 06
Location: Lundin Links, Fife
User status: Offline
|
I've not made any mistakes, but the copper we receive from a company to produce cable is meant to have a 25 year guarantee... But whichever idiot was working on the machine somehow buggered up the copper so that it'd be fucked after a year. The company phoned us to tell us about this and not to use the copper. We'd only run about 2,000,000m of Core and 500k of cable by this point
|
Twiggy
Member
Registered: 15th Oct 04
User status: Offline
|
I gave a chap £20 gas instead of £10 in the shop on my 2nd shift!
|
Matt.H
Member
Registered: 12th Mar 03
User status: Offline
|
Its not something I can do myself as I'm not a machinist but there is potential to scrap one component which costs around 120k each.
|
shaunmods
Premium Member
Registered: 12th Mar 07
Location: Glascote, Staffordshire
User status: Offline
|
In my old job when I worked for Fiat I accidently forgot to tell a customer that there was a 50 mile a day limit on his 48hr test drive until the last minute. The bloke went ape shit at me and stormed out the showroom. Little did I know he son had been in a few days before a put a deposit down on a Smart Roadster. His dad must have said something to him and he pulled out so we lost both deals whoops! God I got such a bollocking for that
[Edited on 18-01-2010 by shaunmods]
|
harrisp
Member
Registered: 15th Dec 07
Location: Derbyshire
User status: Offline
|
Second day at my new job I burst a water main with a hammer drill ( was digging for the pipe anyway) then the other week when first fixing £500k I took a stop end off a pipe, the lad I was working with hadnt turned the stop cock off properly and I flooded two floors, the site owner walked in 10 minutes later, he wasnt impressed.
|
16vKarlos
Member
Registered: 27th Oct 07
User status: Offline
|
quote: Originally posted by Twiggy
I gave a chap £20 gas instead of £10 in the shop on my 2nd shift!
Im not made of mistakes either But..
I asked for £15 for each gas + electric... Paid.. Got home.. YOu have £50 Gas... You have £50 Electric.. BONUS!!!
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
i dont make mistakes. i do my job properly.
|
Shell
Premium Member
Registered: 14th Oct 08
User status: Offline
|
When I worked at Topshop, I let a lady return a £200 dress she bought on the website, completely forgetting we couldn't sell it on. So we made a loss of £200! Whoops. It was simply explained to me why it couldn't be sold on then nout else was said.
|