Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by rickiek123
quote: Originally posted by Olsrey
What else are you changing?
Valve springs, valves,
getting oil squirters, rebore block,
upgrage the turbo, injectors and then the cams, diff, clutch etc
allsorts really, depending on money aftermarket management
You going to a different intercooler to make the piping a bit less restrictive?
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by Olsrey
quote: Originally posted by rickiek123
quote: Originally posted by Olsrey
What else are you changing?
Valve springs, valves,
getting oil squirters, rebore block,
upgrage the turbo, injectors and then the cams, diff, clutch etc
allsorts really, depending on money aftermarket management
You going to a different intercooler to make the piping a bit less restrictive?
yeah will be looking in to it, i have another cooler but not sure if i want to use it yet.
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
small update, cars in more bits now and my autosprint cams and quaife diff have turned up
[Edited on 27-12-2008 by rickiek123]
|
stu_c
Member
Registered: 11th Dec 07
Location: Westleigh, Greater Manchester
User status: Offline
|
i absolutley love this car look !!
thanks for the engine btw good to meet u
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
what spec cams have you gone for? be needing solids now?
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
id watch the autosprint cams, there not all that good!
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
quote: Originally posted by philip2
id watch the autosprint cams, there not all that good!
what you make of sbd cams?
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
sbd cams are kent, tbh best place for cams are like of newman, catcams or QED(more n/a though)
but from what ive heard about kent, they may say peak rpm is 8k, but if your motor only peaked at 7k, and you rang them up they'd simply tell you your engine isnt up to spec, even if it obv is.
what are the autosprint cams been ground too?? cars looking tidy though
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by stu_c
i absolutley love this car look !!
thanks for the engine btw good to meet u
Cheers fella good to meet you 2
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by Nic Barnes
what spec cams have you gone for? be needing solids now?
How do Nic hows the tbs coming along?
The spec i was told is ........
260* duration and a lift of 360 ", time in at 110*
Got them cheap 2nd hand off Mig, they are regrounds so i can still run my standard lifters? Looking in to going for solids any way.
Any one any ideas if i will gain anything from these?
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by philip2
sbd cams are kent, tbh best place for cams are like of newman, catcams or QED(more n/a though)
but from what ive heard about kent, they may say peak rpm is 8k, but if your motor only peaked at 7k, and you rang them up they'd simply tell you your engine isnt up to spec, even if it obv is.
what are the autosprint cams been ground too?? cars looking tidy though
Cheers Fella
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
Ok so i need a bigger intercooler in the search for more power, i have one but it is seriously going to change the front of the car so i dont know if im keen on it!
got a quick snap of it on my other corsa......
i will probably loose the fog lights and top of the bumper if i use this, other option is to get a slightly smaller one..
As it is now......
The other cooler i have...
What do yous think?
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
u2u matey about solids
as for the coolers, what sort of power are you aiming for? id maybe sell both of those or one and go for a bigger one same style as the one on the red corsa. the other one imo is too tall, would still be nice to get air to the radiator
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by philip2
u2u matey about solids
as for the coolers, what sort of power are you aiming for? id maybe sell both of those or one and go for a bigger one same style as the one on the red corsa. the other one imo is too tall, would still be nice to get air to the radiator
Cheers matey, u2u'd back,
I will maybe sell them both then, i want to hit the 400bhp mark its running 330 at 1 bar now.
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
just get one abit bigger than the one you have on the red one then, then one on the white is abit OTT
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by philip2
just get one abit bigger than the one you have on the red one then, then one on the white is abit OTT
Will look in to it
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
quote: Originally posted by rickiek123
quote: Originally posted by Olsrey
What else are you changing?
Valve springs, valves,
getting oil squirters, rebore block,
upgrage the turbo, injectors and then the cams, diff, clutch etc
allsorts really, depending on money aftermarket management
what you doing with the turbo on it mate?
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by fazza
quote: Originally posted by rickiek123
quote: Originally posted by Olsrey
What else are you changing?
Valve springs, valves,
getting oil squirters, rebore block,
upgrage the turbo, injectors and then the cams, diff, clutch etc
allsorts really, depending on money aftermarket management
what you doing with the turbo on it mate?
Not sure yet, might get a new one or get this one reconditioned.
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
what turbo you got?
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by philip2
what turbo you got?
t34 garrett, turbonetics stage 2
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
Lovely Car Mate
And Thanks Again for the Engine,Nice to Meet You
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
should be fine then
was waiting to see if replied saying you had a 'kkk'
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
nowt wrong with a kkk. them kkk26's can make good power. 400 quite happily.
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by C-R-A-I-G
Lovely Car Mate
And Thanks Again for the Engine,Nice to Meet You
|
rickiek123
Member
Registered: 27th Mar 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by Nic Barnes
nowt wrong with a kkk. them kkk26's can make good power. 400 quite happily.
Whats the difference between the 16 and 26?
|