Scotty_B
Member
Registered: 11th Jun 03
Location: East Kilbride
User status: Offline
|
I bought the recent edition of Max Power and in the Worx section it tells you how to paint plastic. So I decided to have a go and paint the boot lock surround. I sanded, primed, painted, sanded and then laquered. Now after allowing the laquer to dry it says that I must sand the laquer with 1200 to take the shine off it and then use T-Cut to bring back the shine. I tried this and I can still see where I used the 1200 on the laquer.  It looks like I'll have to start again.
Is there any experts on here that can confirm Max Powers information correct?
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
dont sand the laquer, its not worth the hassle, essecially on something that small.
|
Scotty_B
Member
Registered: 11th Jun 03
Location: East Kilbride
User status: Offline
|
I'll try T-Cutting it again and then use a good polish to bring out most off the shine.
|
cobra148
Member
Registered: 27th Oct 01
Location: Here in front of my monitor.....
User status: Offline
|
Give this a read, it worked for me.
http://www.corsasport.co.uk/board/viewthread.php?tid=38828
|
Scotty_B
Member
Registered: 11th Jun 03
Location: East Kilbride
User status: Offline
|
Cheers Cobra!
Why the hell did the MaxPower worx card say to sand the laquer with 1200 if you don't need to?
|
