jonathanbrook
Member
Registered: 28th Dec 03
Location: Huddersfield / Nottingham
User status: Offline
|
Ive had a problem with my Corsa B 1.2 8v for a while...
When its damp/wet or when I drive through standing water I get two things happen IF the revs are increasing (you can avoid it by accelerating ridiculously slowly and getting through up the gears quickly). Normally the engine management light comes on first, followed by the car kind of kanagrooing. Sometimes the kangarooing is followed by the ecu light.
The kangarooing feels like its misfiring and not running on all cylinders. If im lucky enough to be going downhill I can put it into neutral and the light goes off and it goes back to normal.
So... what I've done is...
1) Replace the leads. This didn't help.
2) Put a bag round the ignition module and the DIS pack to keep them dry. This didn't help.
3) Bought and fitted new DIS pack. This helped a lot and the problem happens a lot less.
However, when its pissing it down (or when I'm accelerating quite quick and the revs are high) it still happens. But what I've noticed is that now when I put it into neutral (and roll down the hill) so that the light goes out the battery light is dimly illuminated. And I've also noticed that the problem occurs more so when the fan belt is slipping and screeching.
I'm thinking its all linked together but was wondering if anyone could tell me what to do next. Obviously tightening/replacing the belt is one thing - could anyone tell me how to do that?
Thanks in anticipation
[Edited on 28-12-2003 by jonathanbrook]
|
Kerry
Member
Registered: 5th Oct 01
Location: Norwich
User status: Offline
|
sounds like ure alternator isnt very happy
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
sort out the fan belt
possibly the alternator is goin-gone
and new plugs? dizzy cap and rotor arm
tightening the belt is piss on the 8 v there is a threaded bar you adjust and it moves it out
|
Kerry
Member
Registered: 5th Oct 01
Location: Norwich
User status: Offline
|
quote:
Originally posted by Adam-D
dizzy cap and rotor arm
quote:
Originally posted by jonathanbrook
3) Bought and fitted new DIS pack.
|
DP.
Member
Registered: 21st Dec 03
Location: Stoke-on-Trent
User status: Offline
|
If your engine management light came on then read the code off it and see what the problem is.
Also, dont know if your engine has one but when my EGR valve gets clogged up it used to cause my engine to kangaroo etc
|
Kerry
Member
Registered: 5th Oct 01
Location: Norwich
User status: Offline
|
also u could check for any splits in any air pipes
how to read ecu faults is there
http://www.corsasport.co.uk/board/viewthread.php?tid=101080
and to see if its egr valve disconnect it and take it for a run see if it clears
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
8v engine = no egr valve
dis pack there is dizzy cap, rotor arm, and coil pack also known as dis pack
i think the engine light has to be on for 20 or 30 seconds for it to log a fault
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
quote:
Originally posted by Kerry
also u could check for any splits in any air pipes
how to read ecu faults is there
http://www.corsasport.co.uk/board/viewthread.php?tid=101080
and to see if its egr valve disconnect it and take it for a run see if it clears
aye map sensor pipe can case it to play up and cut out
|
jonathanbrook
Member
Registered: 28th Dec 03
Location: Huddersfield / Nottingham
User status: Offline
|
quote:
Originally posted by Adam-D
tightening the belt is piss on the 8 v there is a threaded bar you adjust and it moves it out
At which end? Alternator end or the one at the bottom of the engine? Ive bought a new belt goes because the other one looks pretty ropey so I how do I replace it?
Ive bought a Haynes manual and the pictures bear no resemblance to my car (and yes, its the right manual for the car!). The only thing is the wrenches I have are quite fat and I cant get one in between the end of the alternator and the body work (wheel arch) behind the air filter assembly so I cant work out what tightening or loosening the bolt on that pulley does.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
buy some spanners open and ring ones
you undo the two mounting bolts and swing it overtake belt off fit new belt and swing back and tighten up if you feel you cant do it then get a mate who knows or a garage wont charge more than 1 hour labour to fit and adjust it max £30 for it but the alternator could be ill? how many miles has it done?
|
jonathanbrook
Member
Registered: 28th Dec 03
Location: Huddersfield / Nottingham
User status: Offline
|
quote:
Originally posted by Adam-D
buy some spanners open and ring ones
you undo the two mounting bolts and swing it overtake belt off fit new belt and swing back and tighten up if you feel you cant do it then get a mate who knows or a garage wont charge more than 1 hour labour to fit and adjust it max £30 for it but the alternator could be ill? how many miles has it done?
48000 miles.
I think I tried that. The two bolts clamp the top of the alternator to a bar thats got a long hole in the middle. Presumably so you can swing the alternator toward the front of the car? But theres also another bolt on the top and two on the bottom? Do I undo those as well? I cant see how it pivots if not. Or didnt I pull hard enough after loosening the other two?
Im really grateful for your help!
[Edited on 28-12-2003 by jonathanbrook]
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
off hand i cant remember.
if it was sitting next to me i could tell you
the long bar adjusts its distanceyes to change it swing it towards the front of the car just undo the two smack it to free it and see if it swings if not loosen the others aswell cant go wrong really if u get stuck just reverse what you have done and take it the garage 
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
ps thats a low milage so im not sure the alternator should be ill already mine has done 65k and its all fine
|
Corsa^Dan
Member
Registered: 4th Dec 02
Location: Sleaford, Lincolnshire
User status: Offline
|
8v engine = no egr valve
false, mine has 1...... mine has been replaced too 
|
Tom J
Organiser: South Wales
Premium Member
Registered: 8th Sep 03
Location: Bridgend
User status: Offline
|
sounds like what mine was like before i cleaned the ICV
|
jonathanbrook
Member
Registered: 28th Dec 03
Location: Huddersfield / Nottingham
User status: Offline
|
quote:
Originally posted by flameredcorsab
sounds like what mine was like before i cleaned the ICV
ICV? Idle air control valve? I had new one of them about a year ago.
|
Ollie_Corsa
Member
Registered: 19th Jan 03
Location: Southampton
User status: Offline
|
mine did this but all the ime not just in the wet and it was the idle air inlet valve
|
