Bennn
Member
Registered: 20th May 01
Location: was newcastle now Sweden
User status: Offline
|
got my kit put on today, perfectly obvious how to adjust the rears.
The front ones are a different story as only a few threads then the top of the assembly poke out the top of the strut. I could turn it with a spanner but I get the impression it will only raise/ lower the body through the strut top as opposed to adjust the dampner for firmness
Would this work? I presume its the only way to do it but it doesnt seem to be right for some reason
I didnt get instructions or the adjuster tool supplied with the kit
cheers
|
R Lee
Member
Registered: 15th Aug 03
User status: Offline
|
you should have a little white knobly thing (adjuster) with the kit. other wise i dont see no problem with using a spanner as long as you dont chew the bit up...
|
Bennn
Member
Registered: 20th May 01
Location: was newcastle now Sweden
User status: Offline
|
i didnt get the nobbly thing
as i say ill give it a blast with a spanner but i cant .....sorry shearer has just scored
anyway - I cant see how it works
cheers
[Edited on 07-01-2004 by Bennn]
|
R Lee
Member
Registered: 15th Aug 03
User status: Offline
|
not a very good picture but in case you didnt know which way you needed to turn it.
anti-clockwise to firm it
|
Bennn
Member
Registered: 20th May 01
Location: was newcastle now Sweden
User status: Offline
|
hmm
wonder where i can get one of those
a spanner is probably just as good but one of them would be useful
cheers again
|