Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
as above which ones do you think would be best, im going to have 16s so would they scrub 55mm down
cheers
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
anyone personally the KW look really gud and have a bigger range but are they a gud quality ?
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
You can run 16 x 7's et45 down to 60mm with no probs. Ive ran my 16x7 et45's with 195/40 rubber as low as 80mm before with just arch skimming and de-bolting and they havent caught...
|
ffls
Member
Registered: 29th May 02
User status: Offline
|
Go for KW V3, top kit!
I had KW V2 in an Audi S3, so I know what I'm saying
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
35-70 sounds more like wat im after, how much do tehy go for?
|
ffls
Member
Registered: 29th May 02
User status: Offline
|
KW V3 shoul cost more than 1000 Euros!
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
wat about the cheap ones? i refuse to spend more on suspention than my cars worth, lol
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
well i think the kw varient 1 which is 534 look very good and with gud range on the height adjustment too
so if im running 16s down say 60mm all i need to do is debolt arches ?
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
quote:
Originally posted by corsa_rob
as above which ones do you think would be best, im going to have 16s so would they scrub 55mm down
cheers
What width are your alloys, if they are 7in wide and et45 then your wont be able to go down 55mm enless your change springs in coilovers, trust me ive had many problems with mine
As you can see you cant wind the spring platform down any further than the wheel cuz theres no room, the yellow spring is a new sring i had to buy to get it about 55mm, very very very good ride quality though
This is how low it is with the front wound down as far as i can and also the back is as far as you can go but other possabilities with the back if needed
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
Sorry thats with FK konigsport coilovers
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
ok so are kw coilovers going to be the same problem >?
|
deanmcreynolds26
Member
Registered: 15th Sep 03
Location: E46 //M3
User status: Offline
|
so what about my wheels technomagnesio 17" 49 offset would they cos lots of probs with the FK coilovers?? cos i was gona get a set...
|
luca2020
Member
Registered: 26th May 02
Location: Maidstone, Kent
User status: Offline
|
ive got FK Highsport coilovers with 215/35/18 tyres and a offset of ET42, no probs at all
|
deanmcreynolds26
Member
Registered: 15th Sep 03
Location: E46 //M3
User status: Offline
|
so what about my wheels technomagnesio 17" 49 offset would they cos lots of probs with the FK coilovers?? cos i was gona get a set...
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
i'm going to be getting MM t12's 16*7 195/45
Not dropping the suspenion straight away but will be soon prolly on eibach sportslines id say. they are -45 to -50mm
what offset will i get these in. I really dont want to have to do any arch modz
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
The problem with the coilovers is the width - as to get very low on the standard helper spring your wheel will be in the way as the pic shows. 49mm offset is probably not in your favour either as your wheel will be rather tucked in the arch.
|
ultim8DTM5
Member
Registered: 18th Jun 02
Location: Sydney, Oz
User status: Offline
|
Whats the prices of both?
|
luca2020
Member
Registered: 26th May 02
Location: Maidstone, Kent
User status: Offline
|
phone pvd, they advised me that mine would fit and they did
its not just FK coilovers tho, its all coilovers have this problem
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Corsa B or Corsa C?
Corsa B - £505rrp
Corsa C - £525rrp
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Above prices for HighSport kits.
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
Im running Spax front Coilovers (RSX KIT). My tyres (195/40 continentals)JUST catch the springs by 1mm If I wind them down real low. At the minute they are set at 60mm drop and the bottom spring seat just sits above the widest part of the tyre where it meets the rim so im OK. This is on a 7 x 16 et45 rim. If I want lower I have to use 3mm spacers which bring the wheels out to et42.
As Cheeky Charlie says you can buy springs of differing poundages i.e 175lb, 200lb, 225lb and also differing lengths from places such as Rally Design ( http://raldes.co.uk ) for about £10-£15 per spring.
This way you can chop and change if you wished, which means you may be able to wind the bottom spring platform up high enough to clear your alloy/rubber and then use a shorter spring to give you a lower drop. Or you have the option of using wheel spacers to give you clearance but you shouldnt need any worse an offset than et40 to give you coilover clearance with 7" wide rims.
[Edited on 13-01-2004 by TOMAS]
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
so basically will the KW coilovers be alright with 16 inch x 7 width et 45s thats all i really need to know guys how low could i go with the arches debolted?
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
you will need 3mm spacers as the wheels/tyres will most prob catch on the coilovers themselves. Depends on what bumpstops they use as to whether they'll scrub on arches. Mine were OK with 3mm spacers when lowered 75mm. Just play around with them...
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
k and one more thing do you have to take the wheel off to adjust them ?
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
Yes with coilovers you must remove the wheels to adjust them. You can try and do it with the wheels on, it may be possible but it will be very fiddly!
[Edited on 14-01-2004 by TOMAS]
|
