Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
got a 3-door corsa 96 n reg
the drivers side return spring went so i want to de-lock it
if i got the outer and inner part's off a 5-door corsa The rear handles and inner shells they screw to would this be a straight swap??
and how good would halfords paint be to paint em cause the body shop wants £150 to do em
adam
|
Mav 3000
Member
Registered: 16th Aug 01
Location: Leicestershire
User status: Offline
|
I did mine using a can of Vaux paint from a dealer - £5 including Lacquer - easy to do when you take the handle-pull off the handles if you see what I mean.
Handles will be a straight swap. Veccie handles would have come pre-primed n smooth, but make sure you sand yours down very well with wet n dry and they'll be the same (Ive colour coded my 5-door rear handles).
No need to but new rear cases though I wouldn't have thought.
Rich
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
the cases that are there have the lock barrels in them.
so if i got rear shells cases they wont so it jus bolts on
make my life eaiser.
what d-y reckon?
adam
|
Mav 3000
Member
Registered: 16th Aug 01
Location: Leicestershire
User status: Offline
|
When I de-leocked mine, I simply took the locking barrel out and then re-attached the rear case - the metal bit that the bolts go through right?
If you've got the parts already then theres no point worrying about this.
Best advice if you paint it yourself is take your time, the prep defines the quality of the final result.
Rich
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
cheers fella
ill get em soon
my handle stll works for now
"bit skint"
adam
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
when you got the veccie handles were they split ie the hinge so you could paint them and how did you put it back to gether??
|
GLSi GUY
Member
Registered: 5th May 02
Location: Preston, Lancs
User status: Offline
|
you nock the pin out, so it comes apart, but make shure you dont loose the spring.
i de-locked my car this week, took me 20 mins each door (i've taken the doors apart that many times i can do it with my eyes shut, lol). i used some Cav rear door handles, cleaned them up, primered and sprayed them, and put them on the car.
if anyone whats their car delocking then i'll do it for them, 70 quid and i will supply the handles, or 50 quid if you supply the handles.
Rob
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
im off to the scrappy so cav rear handles veccie rear handles and corsa 5 door rear handles will fit oh im spoilt for choice
cheers
adam
|
Corsa Lad 69
Banned
Registered: 24th Mar 02
Location: Ballymoney,Northern Ireland
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=50435
|
Foz
Member
Registered: 8th May 02
Location: Bristol
User status: Offline
|
What colour is your car? Usually flat paint is a alright match but metalic is shite.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
old thread alert  nearly a year old this
check ma garage i did it all it was fine
|
