MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
I have brought a sebring extreme back box and sebring striaght through pipe. i had a go at fittin it today and the striaght through is about 3" too long so it is hittin the cat.  It seems like the flange on the end must move closer to the hanging hooks to fit onto the pipe inside the cat. Also it seems like the bend is not correct also as it is hittin the hand brake cable on the rear axle. Do u guys know wot could be the problem. Could it be that the pipe has been wrongly made.
Cheers guys
Mark 
|
antscorsa
Member
Registered: 11th Aug 02
Location: london
User status: Offline
|
maybe they sent u it for wrong cora like B shape instead of C , vice versa
|
BabyBlade
Member
Registered: 5th Feb 03
Location: Hereford Rides: Ninja 600
User status: Offline
|
erm heard of people cutting the end near the cat to make exhausts fit before, duno why tho.
as for the back a lot of exhausts hang low and the exhaust knoking on the ream beam is a common fault
[Edited on 19-02-2004 by Sethion33]
|
MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
cheers guys, but other people have fitted them fine without no problems, i think i want a new pipe as it is no way near right. do any other compainies make straight through pipes
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
I've had straight-through pipes that didn't fit, even though they were the part listed for a Corsa B.
Send it back and get the part from another manufacturer.
Does the rear box line up with the hangers correctly? If so, keep that and see if you can get a different centre section.
|
MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
wot other manufactures do them
|
Mistamist
Member
Registered: 16th Jul 03
Location: Gillingham, Kent
User status: Offline
|
make your own, its easy, just get some correct diameter pipe cut out the centre box and couple of adapters and job dun. i did mine for total cost of £12 (including paste, tape and brackets)
|
