Voyto
Member
Registered: 9th Feb 03
Location: Stafford
User status: Offline
|
Was just putting my interior back in and changing my LEDs back to standard and now my indicators are feked
When i use the indicator stick, the light on the dash does not flash it just stays on and the indicators do not function.
When i put the hazzard switch on, everything is normal except only the passengers side of the car flashes.
when i press my alarm fob to lock/unlock the car all the lights flash as normal so the drivers side does work.
Help
[Edited on 03-07-2004 by VoYtO LeViCh]
|
brummiesxi
Member
Registered: 1st Jul 02
User status: Offline
|
sounds like the relays gone m8, the copper switch inside the relay tends to snap off and can be stuck on the one side of the switch.
|
Voyto
Member
Registered: 9th Feb 03
Location: Stafford
User status: Offline
|
Thanks for replying mate where do i look for this and how can i check if it is the problem?
|
Tom J
Organiser: South Wales Premium Member
Registered: 8th Sep 03
Location: Bridgend
User status: Offline
|
is ur hazard warning switch on properly? check it because this stuff happened when mine wasnt on properly
|
scoob
Premium Member
Registered: 16th Oct 03
Location: Beverley, E Riding of Yorkshire
User status: Offline
|
check the fuses mate i would start there
|
Voyto
Member
Registered: 9th Feb 03
Location: Stafford
User status: Offline
|
i think it is yea. i tried taking it out completely and i had the same problem. i did have a bitta trouble puttin the switch back in but why would it be that the indicators dont work even when the switch is out?
|
Voyto
Member
Registered: 9th Feb 03
Location: Stafford
User status: Offline
|
quote: Originally posted by scoob
check the fuses mate i would start there
Tried all the fuses in the fuse box by ya knees. they are all fine. if they were gone the indicators wouldnt work at all would they? they all come on with the alarm
|
Voyto
Member
Registered: 9th Feb 03
Location: Stafford
User status: Offline
|
quote: Originally posted by flameredcorsab
check ur hazard warning switch is on properly
ok ill check it now......
|
scoob
Premium Member
Registered: 16th Oct 03
Location: Beverley, E Riding of Yorkshire
User status: Offline
|
im not to sure mate i just had simerlar problems to u and it was a fuse hope u get it sorted
|
Graham
Member
Registered: 12th Oct 03
Location: Lincoln.
User status: Offline
|
nah mate i think its number 13, the hazards and indicators work but the light on dash wont. check all and i mean all the fuses to check if any have blown.
|
Voyto
Member
Registered: 9th Feb 03
Location: Stafford
User status: Offline
|
[flameredcorsab] you were right
i took the little cover off and the hazzard light switch pushed in that little bit extra. all worked fine then. ive managed to get the cover on with it all working but its a bit didgy, ill just try not to use my hazzards that much.
Cheers for ya help all So helpfull this place
|
Tom J
Organiser: South Wales Premium Member
Registered: 8th Sep 03
Location: Bridgend
User status: Offline
|
|