scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
PRICE CHANGE DUE TO BULK BUY
Let me know ASAP as putting in an order this wknd hopefully.
I can hopefully get hold of some stud conversion kits to fit most if not all vauxhalls.
It comprises of 16 studs and 16 chrome nuts. This is a high quality kit and has been running it on my Nova Turbo for nearly 6mths without one problem. If they were gonna snap I’d imagine they’d do it on my tuned LET Nova Its very easy to fit and save a lot of time when fitting and removing wheels, especially the larger rims. Each Stud can be screwed into place using lock tight and a Phillips screwdriver, so specially made for the job 
Its not just some dodgy ebay job or threaded bar kit but one that’s been highly manufactured and distributed all over the country/world.
My mate bought a similar kit from a reputable tuner and paid £120 for it. I shopped around and got a contact that can got me the kit for £40 posted.
After getting the min number of buyers i can now get the kit for £35 to your door.
Also available on request:
- 4 extra studs and nuts available for 5 stud vehicles
- 10mm longer studs than std if required
- Open nuts instead of closed
Also locking nuts availble at £20 a set
Whether you want the std kit like mine with closed nuts or alternatives options like the longer studs etc
Need to get this wrapped up so PM me if interested.
Pics of them on my Nova Turbo
|
corsapaul21
Member
Registered: 14th Jun 04
Location: Wired to the moon!
User status: Offline
|
Does this include changing the PCD?
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
You just replace your bolts to studs so doesnt effect the PCD. Been using this kit on my 300bhp+ nova turbo for 6 months with no problems.
And because my 17's dnt have spiggot rings its easier to whip the wheels on/off with the stud kit. looks trick too. 
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
bttt
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
bttt
Cheaper than the £120 Harry Hockley setup. Only come round once at this price as nearly double outside the bulk buy discount 
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Are the std threads long enough for most alloys, or would you recommend going straight for the 10mm longer thread?
Is there a "compatible" nut on another vehicle that has the same dimensions (eg, when buying locking wheel nuts, etc)?
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
I can supply the locking wheel nuts as these are made for the studs.
Im running std studs/closed nuts with dare 17's and there is plenty of thread to bolt too.
I would advise the long stud if you are using 10mm or less wheel spacers. Order going in soon mate so ley me know.
anyone else
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Using 3mm spacers - you think they'll still need the longer of the two?
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
best to use the longer ones mate just to be safe. These come with open nuts.
Email me on k11ova@freeuk.com and i will send you payment instructions. I can do both the locking nuts and stud kit for £55 to your door.
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
bttt
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
bttt
order being placed soon so get em cheap while you can
|
scooby999
Member
Registered: 6th Oct 04
Location: Worcester
User status: Offline
|
bttt
|
