char_chu
Member
Registered: 29th Sep 04
Location: london
User status: Offline
|
i tried changing my dashboard bulbs by taking off the top part behind the steering wheel (where the indictors are). I didnt actually move or touch any of the wires, although i have abit of trouble putting that part back. Later that day, i noticed that the display (clock and temperature) was not working. What can I do?
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
first things first make sure ya dahs light dimmer isnt turned fully down, then if that aint it, remove the steering coloum shroud and check nothings been dislodged, trapped or cut, and repair as necessary
|
char_chu
Member
Registered: 29th Sep 04
Location: london
User status: Offline
|
yep i checked that already, everything seemed fine. where would i need to go to get it fixed and how much would be approx cost?
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
only thing i can think is, the multi funcional displays do this allot, basically either the plugs come loose out the back of the inner plug comes away from the circuite board inside in that case ya have to sit and solder it back on very carefully i had to do it to mine
|
