Dom
Member
Registered: 13th Sep 03
User status: Offline
|
if you have two preouts, then you will have a front and back set. If one of the amps has an output, then i would use the back set of preouts from your HU into one amp (with the outputs) and then into the other, as the quality will be the same - whereas using a splitter will cause the HU more stress (has to up the output current etc etc).
If your amp doesnt have an output, then yea you will have to use a splitter.
And yes, the subs will work fine, aslong as there recieving the same signal and that they are set up correctly (same gains etc etc) 
Dom
p.s - if you have 3 amps (two for the subs and one for the front comps?) then make sure that you use the correct preouts from the headunit ie: the back preout goes to the subs and the front preout goes to the amp for the comps etc
|
