Tom_1.216v
Member
Registered: 16th Apr 04
Location: SOUTHAMPTON
User status: Offline
|
i cant sell it with the exhaust banging on the rear axel. At the moment ive wrapped some black cloth round the axel and i cant hear the exhaust bang.
But lets face it no one wants to buy a car with a somin wrapped round the axel.
cars lowered -60 and its a magnex oval back box.
Any help welcome
|
antscorsa
Member
Registered: 11th Aug 02
Location: london
User status: Offline
|
go buy some new rubbers.
|
Tom_1.216v
Member
Registered: 16th Apr 04
Location: SOUTHAMPTON
User status: Offline
|
where from, tried search engines and i comes up with fcuk all.
|
antscorsa
Member
Registered: 11th Aug 02
Location: london
User status: Offline
|
local halfords etc. 2 quid each
|
Tom_1.216v
Member
Registered: 16th Apr 04
Location: SOUTHAMPTON
User status: Offline
|
i went in their a while bk and they said they don't stock them. Mind u i asked a women. cheers mate
|
antscorsa
Member
Registered: 11th Aug 02
Location: london
User status: Offline
|
or any local motor spares shop shuld do them.
sounds like the heavey weight of the magnex has stretched the rubbers to hang lower and bang on axle.
|
ShEp
Member
Registered: 9th Aug 05
Location: Dingwall, Highland
User status: Offline
|
leave the black rag and hope its a numpty that buy's it...?
|
W7LD R
Member
Registered: 10th Aug 05
Location: Manchester
User status: Offline
|
u can also check and see if the u brkt that holds the two exhaust pipes together (backbox & Mid section) has come loose, if it has the exhaust pivots and drops down, has annoyed me a fare few times on previous corsa's. they are 13mm i think
|
ShEp
Member
Registered: 9th Aug 05
Location: Dingwall, Highland
User status: Offline
|
also try taking the back box off again and re-fitting it, pushing it on as far as it will go, cos if its not on far enough it'll bow at the axle, lowering itself and banging like it is, i had this problem on mine, with the same backbox
|
GHurn
Member
Registered: 15th Jan 05
Location: magor, south wales
User status: Offline
|
i had this problem i lowered my car 80mm and the exhaust clamp where the back section meets the middle section of the exhaust had become weak and alowed the exhaust to shag, so i put a new clamp and repositioned the exhaust and rattle gone
|
