Corsa E-Tec
Member
Registered: 4th Feb 04
Location: Stevenage Drives: Leon Cupra
User status: Offline
|
is that basicly hand tight, coz i cant find a torque wrench to buy that goes any less than 13.6 nm - 10 ft-lb.
cheers
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
yes, hand tight should do it. anything that low wont need to be exact.
cam cover bolts?
|
Corsa E-Tec
Member
Registered: 4th Feb 04
Location: Stevenage Drives: Leon Cupra
User status: Offline
|
it's for the sump, i've allready snapped one last time, that i have to try and get out the block.
i've bought new sump pan, gaskets and bolts so dont wanna mess it up so wanna get all the right info.
cheers dave.
p.s new sump pan was £195 incl bolts 
[Edited on 06-05-2006 by Corsa E-Tec]
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
For the sump you just nip them up. You don't want it too tight. I made the same mistake as you, used my torque wrench though and found out it was totally out. New sump and a new set of bolts 
|
