csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
where can i get funky bolts from??...
on my old rocker cover i used a company called pro-bolts.....and had some funky gold adonised (alloy) bolts...but they were like £15 for 10..
any ideas?
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Look in Yellow Pages for your local fixings or bolt shop, they'll be able to sort you out.
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
I'm sure you already know this, but use some copper grease on the bolts if you are using alloy ones, or you'll never get them off!
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
indeed.......
anyone know the length/ thread pitch - dia'??
off the top of your head?
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
just go to exeter street,. a quid or two for a set of stainless allen headed bolts...
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
yeh...but where in exeter street??...
they'll need to know the length/thread and pitch etc.....
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
(this post is also a reminder for dave a - as he was supposed to be sending me some in the post...)
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
just take 1 original bolt and they will give u allen headed ones... its nr the top of exeter street nr where wheel tech used to be.. think the rocker cover bolts are only m3 or m4 thread...
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
k..i shall pay them a visit 2morro after the rr day
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
problem with these is they cost a fortune unless you buy in bulk. i have loads here, send an address and they are yours
is it just for the rocker cover?
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
and possibly 3 for the water pump ......
ill re-send my addy via u2u
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
i'd never use alloy bolts... stainless all the way!!!
|