marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
First to come out of the new mould and so isn't perfect, but I still think it looks awesome!
This is different to a couple of others I have sold as now the washer jets have been smoothed out.
It seems to have a slight ripple across the bonnet, its not really noticeable when looking at the bonnet unless you get to wing level and look at it, couple of light patches in the laquer, and it has a few marks along the edges.
But taking that all into account, if it was sanded down and re-laquered it might come out fine, or if someone just wants a bad boy bonnet then grab this one and spray it and you won't be running the risk of the fillar cracking behind.
Here are a couple of pics:
And more pics can be found here:
http://www.twistedstyling.co.uk/Hosting/Corsabonnet/
The bonnet does not come with a catch and so requires bonnet bins, the hinges for the rear have been drilled, but havent been fitted up against a corsa yet, so might need to get the olde self tapper out!!
When the mould is sorted and the bonnets are coming out 100% I will be selling these bonnets for about £295.
But as this one has the imperfections selling this one for £200, which I believe is a bargain!
If anyone is interested them drop me a U2U, post here or drop me an email @ cliogtt@gmail.com
I am based in Telford, I can meet someone close by, but would prefer it to be collected, as I haven't got a delivery service sorted yet.
Sorry for the long thread!!
Marcus
|
STEvieXE
Member
Registered: 21st Jan 03
Location: Ballymena N.I.
User status: Offline
|
looks great altho pins would fuck it all up
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
The gap has been left to have a catch fitted, just didn't see the point with this one as it isn't 100% on the outside, but a standard catch could quite easily be fitted
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
u2u sent
|
jamie m
Member
Registered: 3rd Oct 06
Location: Ashbourne, Derbyshire
User status: Offline
|
take any offers on it, how bads the ripple and are the marks very bad?
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
Won't really take any offers on it, will stick it on ebay and chance my luck if nobody want's it off here, just thought I would give it a chance on here first
Its hard to notice the ripple unless your at wing level, the marks are like slightly larger than pin pricks on the edge, just where it has come out of the mould. Its hard to get the marks to show up, but I will see if my proper camera will pick them out later on as the other pics are taken with my camera phone.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
cheers pics of the imperfections would be great cos if there not that bad i know stu will have it
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
If I was putting it on my car, then I would sand the laquer back, fill the slight imperfections and touch them up with black paint and then re-laquer it, might then sort the slight ripple aswell, when I say ripple its not like a wave or anything lol, its just a slight dip.
But will get some pics of the bonnet tonight as its in my garage at the moment.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
cheers, stu said if its not too bad he will give me the cash and ill come and collect it,
"i have a van so its big and get 55 odd mpg "
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
Nightmare at work yesterday so didn't get home until late, will sort the pics tonight
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
Added new pics to the gallery:
http://www.twistedstyling.co.uk/Hosting/Corsabonnet/
Apologies for the random dog in the background and cats tail lmao
|
craig_s
Member
Registered: 5th Mar 06
Location: Birmingham Drives: mk4 astra gsi
User status: Offline
|
what is all the white stuff on the under sideof the bonnet.is it completly carbo fibre ??
|
GavCorsa
Member
Registered: 13th Feb 06
Location: Grantham, Lincs Drives: bmw 323i coupe
User status: Offline
|
looks like bottom half (with center supports cut out) of original corsa bonnet with carbon ontop, easy to bolt onto hinges and put on the bonnet catch
How much would delivery be? got anything sorted yet?
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
The white stuff is just dusty type stuff, will wipe it off before it gets sent anywhere, just been soooooo busy recently!
Delivery would be about £20 if someone really wants it and doesn't want to collect it then I can sort that out, just need loads of bubble wrap and brown paper and I can send it via parcel force
Its carbon upper and fibreglass lower and exactly how Gav describes it
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
BTT for now, last couple of days before I stick it up on Ebay
Could be tempted by £180 if someone wants to collect it this weekend.....
|
neo2
Member
Registered: 24th Apr 01
Location: north east durham
User status: Offline
|
Could it be trimmed back over the head lights, so its like the original one.
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
quote: Originally posted by neo2
Could it be trimmed back over the head lights, so its like the original one.
Sure it could be done with an angle grinder, just not sure what finish it would leave on the edges.
|
craig_s
Member
Registered: 5th Mar 06
Location: Birmingham Drives: mk4 astra gsi
User status: Offline
|
could you still fit a standard bonnet catch to it??or does it have to be the lockin pin type??
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
You need pins on it otherwise you will end up with a smashed windscreen.
|
boyracer2002
Member
Registered: 10th Aug 02
Location: West Yorkshire
User status: Offline
|
quote: Originally posted by ed
You need pins on it otherwise you will end up with a smashed windscreen.
not with these ones, my mates made them and makes them solid so that wont happen.
|
craig_s
Member
Registered: 5th Mar 06
Location: Birmingham Drives: mk4 astra gsi
User status: Offline
|
lol i no you need something to hold them down i just meant can you use a standard corsa bonnet catch or do you need the pins??
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
You can use a standard corsa bonnet catch mate, its got the gap cut out ready for it, just need to take it off another bonnet and then fit it to this one
|
marcus cliogtt
Member
Registered: 8th Nov 03
Location: Telford
User status: Offline
|
Now SOLD
To the man with the white van
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
dunno who that could be then . . .
|